Updated List
Thanks to those who helped me update the list. I'm sure there are still errors and omissions, but accuracy and thoroughness are increasing.
Details by Model Numbers:
• PN-1: rectangular hood w/chevron design; red reset button; 1.2A
• PN-2, PN-II, PN-III, PN-IV, PN-V, PN-100, PN-200, PN-280: rectangular hood; red reset button; removable cord; 1.2A
• PN-4: rectangular hood; red reset button; hard-wired cord; full length motor housing; 1.4A
• PN-4A, PN-4B, PN-4C, PN-2000: rectangular hood; red reset button; hard-wired cord; half length motor housing; 1.4A
• PN5, PN5C: approximately 1ľ” diameter spring-loaded rear wheels, red reset button, detachable cord, metal intake crossbars, wide side air channels; detachable cord; 1.8A
•PN6: approximately 1ľ” diameter spring-loaded rear wheels, on/off/reset switch, hard-wired cord, brush strip, metal intake crossbars; long brush; wide side air channels; corner air channels; detachable cord; 1.8A
•PN6A: approximately 1˝ ” diameter spring-loaded rear wheels, on/off/reset switch, hard-wired cord, metal intake crossbars, narrow side air channels, corner air channels; long brush; 1.8A (according to Erick “lux1521”, a former Vacuumland poster, the wheels were made smaller from this model [and on] to minimize the front of the nozzle from popping up if pushed too hard; they would also likely have improved the suction control of bare floor cleaning).
•6B: approximately 1˝ ” diameter spring-loaded rear wheels, on/off/reset switch, hard-wired cord, plastic intake crossbars, corner air channels (no side air channels or brushes);1.8A;
6BC/N116C was the same except for the 3-wire cord
•7B & 1720s: approximately 1˝ ” diameter fixed rear wheels, on/off/reset switch, hard-wired cord, plastic intake crossbars, narrow side air channels, corner air channels; side brushes; 1.8A;
7BC/N116D was the same except for the 3-wire cord
•1622: approximately 1˝ ” diameter spring-loaded rear wheels, on/off/reset switch, hard-wired cord, plastic intake crossbars, corner channels; 1.8A
•1684: approximately 1˝ ” diameter headlight, electric elbow, red reset button; 1.8A
•1692, 1693: approximately 1˝ ” diameter spring-loaded rear wheels, on/off/reset switch, hard-wired cord, plastic intake crossbars, narrow side channels, corner channels, side brushes; headlight; 1.8A
•1750: approximately 1˝ ” diameter spring-loaded rear wheels, on/off/reset switch, hard-wired cord, plastic intake crossbars, narrow side channels, corner channels, front chevron channels, headlight; 1.8A
•1751: approximately 1˝ ” diameter spring-loaded rear wheels, on/off/reset switch, hard-wired cord, plastic intake crossbars, narrow side channels, corner channels, front chevron channels; 1.8A
•N106s 1.8A—N109s 1.8A—N137s -A,-B,-F, -G,-J; other N137s—1.2A; headlight, electric elbow, red reset button
• N114s: 1.8A; power rocker switch; reset button; standard elbow; headlight
• N115s: 1.8A—-B,-F,-K, -L, -M; 1.2A—later versions; power rocker switch; reset button; standard elbow
• N142A: headlight, electric elbow; black reset button; HPO brush roll; 2.0A
• N144A & -G; electric elbow; red reset button; 1.8A
* Vacuumland poster Rob “Kirbylux77” stated in one of his posts that to convert the spring-loaded wheel set-up to the fixed wheels these service numbers/parts are needed:
45347: Rug Cleaner Body - pn 7B & 1720s style
45123: Rear Wheel.Shaft Cover
45125: Wheel Shafts (x 2)
The 7B & 1720s style base is equipped with slots next to the wheels, so only the shafts and shaft cover are needed if the original has them.
Belts
Type 04953: PN-1 (U.S & Canada), PN-2, PN-4, PN-4A, PN-4B, PN-4C & adjustable nozzle uprights; & the Canadian PN-1, PN-II, PN-III, PN-IV, PN-V, PN-100, PN-200, PN-280, PN-2000
Type 48359: household & commercial L-shape nozzles except those listed for Type 49431
Type 49431: N115Y, N115Z, N137X, N137Y, N137Z, U129S, U129U, U129X, U147G, U147H
Brush Roll Options
3-row, long & stiff, gentle, & beater bar versions were available from c.1962 to c.1986; and again from c.2001-03 with the N142A’s HPO brush roll.
c.2009 the double helix brush roll, s/n 48497 (62077-1), was introduced (N137U?).
USA LIST (1960-present)
• PN-1 (i): 1960; Model F—pale gray hood w/sans serif ‘Electrolux’ caps & dark gray bumper; single light gray non-detachable plastic wand with friction fit hose connect; one longer cord from pn to tank attached to hose with plastic clips for efficient switch to straight suction mode (note: A June 1960 ad for the Model F doesn’t include a pn.)
• PN-1 (ii): 1960; Models F & R—pale gray hood w/ sans serif ‘Electrolux’ caps & dark gray bumper; single ivory non-detachable plastic wand w/spring clip hose connector; one longer cord from pn to tank attached to hose with plastic clips for efficient switch to straight suction mode
• PN-1 (iii): 1961-62; Models R & G (aquamarine green)—ivory hood w/sans serif ‘Electrolux’ caps & teal green bumper; single ivory non-detachable plastic wand; one longer cord from pn to tank attached to hose with plastic clips for efficient switch to straight suction mode; sans circuit breaker or clean-out
• PN-1 (iv): 1962-66; Models G (aquamarine green) & L (ivory) GH (teal green trim)—ivory hood w/serif ‘Electrolux’ caps above smaller sans serif ‘Power Nozzle’ caps & teal green bumper; single ivory non-detachable plastic wand; 2 shorter cords—one from nozzle to wand, and one on hose attached with vinyl straps; circuit breaker & clean-out
• PN-1 (v.a): 1961-65; Model C.A.—ivory hood w/serif ‘Electrolux’ caps above smaller sans serif ‘Power Nozzle’ caps & teal green bumper; metal elbow with wand release; 2-section metal wand; shorter cord plugs into hose cord; circuit breaker & clean-out
• PN-1 (v.b): 1965-66; Model CB (aquamarine green)—same as (iv.a) but with 3-wire cord
• PN-1 (vi): 1966-68; Models G & L (tan)—ivory hood w/serif ‘Electrolux’ caps above smaller sans serif ‘Power Nozzle’ caps & tan bumper; single ivory non-detachable plastic wand which were frequently replaced with a painted metal wand due to inferior quality
• PN-1 (vii.a): 1966-68; Models GH (tan trim)—ivory hood w/tan bumper; metal elbow with wand release; single or 2-section metal wand
• PN-1 (vii.b): 1966-68; Model CB (tan)—same as (vi.a) but with 3-wire cord
• PN-1 (viii): 1968; 1205 & L (teal blue)—teal blue hood w/serif ‘Electrolux’ caps above smaller sans serif ‘Power Nozzle’ caps &white bumper/single ivory non-detachable plastic wand with reinforced hose end
• PN-1 (ix): 1968-71; 1205 & L (teal blue)—teal blue hood w/ w/serif ‘Electrolux’ caps above smaller sans serif ‘Power Nozzle’ caps &white bumper; Canadian telescopic wand with ribbed wand sheath; ribbed teal blue elbow w/Canadian-style wand release
• PN-1 (x): 1971-73; 1205 & L (teal blue)—teal blue hood w/ w/serif ‘Electrolux’ caps above smaller sans serif ‘Power Nozzle’ caps &white bumper; 1-section wand w/smooth teal blue elbow & smooth teal blue sheath w/knurled front; teal blue cords
• PN-1 (xi): 1968-73; CB (teal blue)—teal blue hood w/ w/serif ‘Electrolux’ caps above smaller sans serif ‘Power Nozzle’ caps & white bumper; metal elbow with wand release; single or 2-section metal wand; 3-wire teal blue cords
• PN-2 (i) “Rug Saver”: 1973-74; 1205 (teal blue), L (teal blue)—polished aluminum hood w/floor brush plate logo next to sans serif ‘Power Nozzle’ caps & ivory bumper; 2-section wand w/smooth teal blue sheath with knurled front; jade elbow, teal blue cords
• PN-2 (ii) “Rug Saver”: 1974-75; 50th Jubilee 1205 (honey gold)—polished aluminum hood w/Jubilee decal, floor brush plate logo next to sans serif ‘Power Nozzle’ caps & ivory bumper; 2-section wand w/ivory sheath; jade elbow; ivory cords
• PN-2 (iii) “Rug Saver”: 1975-77; 50th Jubilee 1205 (honey gold)—polished aluminum hood w/floor brush plate logo next to sans serif ‘Power Nozzle’ caps & ivory bumper; 2-section wand w/ivory sheath; jade elbow; ivory cords
• PN-2 (iv) “Rug Saver”: 1973-77; CB (teal blue)—polished aluminum hood w/floor brush plate logo next to sans serif ‘Power Nozzle’ caps & ivory bumper; 2-section wand w/ivory wand sheath; 3-wire cord
• PN-2 (v) “Rug Saver”: 1975-77; Super J 1401 & L (teal blue)—polished aluminum hood w/floor brush plate logo next to sans serif ‘Power Nozzle’ caps & ivory bumper; 2-section wand w/ivory sheath; ivory elbow
• PN-4 (i)“Rug Saver”: 1977-79; Super J 1401 & L (honey gold)—polished aluminum hood w/floor brush plate logo next to sans serif ‘Power Nozzle’ caps & ivory bumper; 2-section wand w/ivory "quick-release" sheath/ivory elbow
• PN-4 (ii)“Rug Saver”: 1977-79; CB (teal blue; honey gold)—same as (i) but with 3-wire cord
• PN-4 (iii) “Rug Saver”: 1979; Super J 1401 & L (honey gold)—same as (i) but with honey gold hood
• PN-4 (iv) “Rug Saver”: 1979-81; Models Olympia One 1401 & 1401-B & Deluxe Special Model 1453 (bronze)—bronze hood w/floor brush plate logo next to sans serif ‘Power Nozzle’ caps & ivory bumper; 2-section wand w/ivory "quick release" sheath
• PN-4 (v) “Rug Saver”: 1981-82—same as (iv) but with bumper airflow slots
• PN-4A (i) “Rug Saver”: 1982; Olympia One 1505 & Deluxe Special Model 1453 (bronze)—bronze hood w/floor brush plate logo next to sans serif ‘Power Nozzle’ caps, ivory bumper & shorter motor housing to aid cleaning under furniture, 2-section wand w/ivory "quick-release" sheath
• PN-4A (ii) “Rug Saver”: 1982-83; Models Silverado Deluxe 1505 & Deluxe Special Model 1453 (metallic gray)—metallic gray hood w/floor brush plate logo next to sans serif ‘Power Nozzle’ caps & gray slotted gray bumper; 2-section wand w/light gray sheath, elbow, & wand latch
• PN-4B (?)“Rug Saver”: 1982; Model CB (bronze)—same as “PN-4A (i)”; but with 3-wire cord
• PN-4C “Rug Saver”: 1979-82; CB (bronze)—same as (iv) but with 3-wire cord
• PN5 (i) “Omni-flo Automatic”: 1983-84; Models Silverado Deluxe 1505, Deluxe Special Model 1453 (metallic gray; light sand gray & jade)—black hood w/only floor brush plate logo on the label & gray bumper; 2-section wand w/light gray sheath & cord; black elbow & wand latch
• PN5 (ii) “Omni-flo Automatic”: 1985-86; Models Diamond Jubilee 1521, Deluxe Special Model 1453 (light sand gray & jade), Hi-Tech 2100, L-E 1623—light sand gray hood w/floor brush plate logo above sans serif ‘Power Nozzle’ on the label & jade bumper; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath
• PN5C (i) “Omni-flo Automatic”: 1983-85; Model CB2000 (two-tone gray)—same as PN5 (i) but with 3-wire cord
• PN5C (ii) “Omni-flo Automatic”: 1985-86; Model CB2000 (light sand gray & jade)—same as PN5 (ii) but with 3-wire cord
• PN6 (i) “Omni-flo Automatic”: 1986-87; Models Diamond Jubilee 1521 & Deluxe Special Model 1453 (light sand gray) —jade hood w/floor brush plate logo above cursive ‘Carpet & Floor’ & sans serif ‘Power Nozzle’ caps; light sand gray bumper & switch; 2-section wand w/light sand gray sheath & cord; jade elbow & wand latch; one long brush strip; equipped with on/off/reset switch
• PN6 (ii) “Omni-flo Automatic”: 1986-87; Models Diamond Jubilee 1521 & Deluxe Special Model 1453 (light sand gray) —jade hood w/floor brush plate logo above cursive ‘Carpet & Floor’ & sans serif ‘Power Nozzle’ caps; light sand gray elbow, wand latch, bumper, & switch; 2-section wand w/light sand gray sheath & cord; one long brush strip; equipped with on/off/reset switch
• PN6A (i) “Omni-flo Automatic”: 1986-88; CVS Model 1561; grid label—jade hood w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps; light sand gray bumper & switch; jade elbow & wand latch; light sand gray cord; two short brush strips; on/off/reset switch & metal intake rungs (all PN6As)
• PN6A (ii) “Omni-flo Automatic”: 1986-87; Models 1623 & 2100 “Special Edition” label w/Canadian wordmark—light sand gray hood w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps; burgundy bumper & switch; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath
• PN6A (iii) “Omni-flo Automatic”: 1986-87; Models 1623 & 2100 “Regency Series” label w/Canadian wordmark above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps—light sand gray hood w/steel blue bumper, switch, elbow, & wand latch; 2-section wand w/light sand gray sheath
• PN6A (iv) “Omni-flo Automatic”: 1987-88; Models Marquise 1521 & Deluxe Special Model 1453 (1987; light sand gray & taupe)—light sand gray hood w/taupe bumper & switch; taupe label with script & block lettering; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath
• PN6A (v) “Omni-flo Automatic”: 1987-88; Models L-E 1623 & 2100 taupe label w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps—light sand gray hood w/taupe bumper & switch; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath
• PN6A (vi) “Omni-flo Automatic”: 1988-89; Model Grand Marquise 1521 & Model 90 1623; navy label with Canadian wordmark above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps—light sand gray hood w/navy bumper & switch; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath
• 6B (i) “Omni-flo Automatic”: 1986-87; Model L-E 1623 grid label—light sand gray hood w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps; jade bumper, switch, elbow, wand latch & cord; 2-section wand w/light sand gray sheath; on/off/reset switch & plastic intake rungs (all 6Bs)
• 6B (ii) “Omni-flo Automatic”: 1987-94; Model 1623 “Special Edition” label—burgundy bumper & switch
• 6B (iii) “Omni-flo Automatic”: 1987-92; Model 1623 “Regency Series” label—steel blue bumper & switch
• 6BC (i) “Omni-flo Automatic”: 1986-88; Model CB2000 (light sand gray & jade; light sand gray & taupe)—same as 6B (i) except for the label & 3-wire cord
• 6BC (ii) “Omni-flo Automatic”: 1988-94; Model CB2000 (cloud gray)—gray hood w/storm gray bumper & switch; gray elbow, wand latch, & cord; label text “Prolux by” above Canadian wordmark w/English & French sans serif ‘Power Nozzle’ ; 2-section wand w/gray sheath; 3-wire gray or red cord (direct marketing model)
• 7B (i) “Omni-flo Automatic”: 1986-87; Model Hi-Tech 2100 grid label w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps—light sand gray hood; jade bumper & switch; 2-section wand w/light sand gray sheath, elbow & wand latch; on/off/reset switch, plastic intake rungs & extra intake air channel (all 7Bs)
• 7B (ii) “Omni-flo Automatic”: 1987-94; Model 2100 “Special Edition” label—burgundy bumper & switch
• 7B (iii) “Omni-flo Automatic”: 1987-90; Model 2100 “Regency Series” label—steel blue bumper & switch
• 7BC “Omni-flo Automatic”: 1988-94; Model CB 2000 (cloud gray)—gray hood w/label text: Canadian wordmark w/English & French sans serif ‘Power Nozzle’; storm gray bumper, switch, elbow & wand latch; 2-section wand w/gray sheath; 3-wire gray or red cord (direct sales model)
• 1622: 1989-91; Models Legacy 1521, Ultralux 1521, Diplomat 1677, & Ambassador 1623—light sand gray hood w/navy Canadian wordmark, bumper & switch
• 1692: 1991-92; Model Ultralux LX 1521 & Diplomat LX 1677—light sand gray hood w/navy floor brush plate logo, bumper & switch; headlight (‘LX’ is the abbreviation for ‘Lux’, the Systčme International unit for illumination)
• 1693 (i): 1992-93; Ultralux Classic 1521—navy hood w/light sand gray floor brush plate logo, bumper, & switch; headlight; 2-section wand w/light sand gray sheath; elbow pivot assembly revised to make it lean forward in upright position.
• 1693 (ii): 1992-93; Ultralux Commemorative Edition—same as (i) but with black hood, bumper, switch, sheath, and elbow
• 1684: 1993-94; Epic 6500SR 1762 & Centralux 1584—light sand gray w/navy floor brush plate logo & bumper; headlight; 2-section electric wand; headlight; vinyl hose
• 1722: 1990-92; Regency Series 1500—light sand gray hood w/steel blue Canadian wordmark; steel blue bumper & switch; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath
• 1723: 1990-92; Ambassador 1623 & Ambassador II 1676—light sand gray hood w/navy floor brush plate logo; navy bumper & switch; light sand gray elbow, wand latch, & cord; 2-section wand w/light sand gray sheath
• 1724: 1992-93; Ambassador III 1676—navy hood with light sand gray floor brush plate logo; light sand gray bumper, switch, elbow, wand latch, & cord; 2-section wand w/light sand gray sheath
• 1725: 1992-94; AdvantageSeries 1625—brown hood with metallic gold floor brush plate logo; beige bumper & switch, elbow, wand latch & cord; 2-section wand w/ beige sheath
• 1750: 1992-93; Epic 6000SR 1718—light sand gray hood with navy floor brush plate logo; navy bumper & switch; light sand gray elbow, wand latch & cord; 2-section wand w/ light sand gray sheath; headlight; chevron air channels at front
• 1751: 1993-94; Ambassador III 1676—light sand gray hood with navy floor brush plate logo; navy bumper & switch; light sand gray elbow, wand latch & cord; chevron air channels at front; 2-section wand with light sand gray sheath
• N106A: 1994-95; Renaissance C104A—coal hood with metallic gold floor brush plate logo; coal elbow; gray bumper; coal electric swivel elbow; headlight
• N106F: 1995-96; Renaissance C104H—gray hood with metallic gold floor brush plate logo; coal bumper; gray electric swivel elbow; headlight
• N106K: 1995-97; Centralux E130A—gray hood with metallic gold floor brush plate logo; coal bumper; gray electric swivel elbow; headlight
• N106L: 1997-98; Epic 8000 C133A—oyster hood w/red floor brush plate logo; fog bumper; oyster/fog electric swivel elbow; headlight
• N106M (i): 1998-99; Epic 8000 C133A—oyster hood w/red floor brush plate logo; fog bumper; oyster/fog electric swivel elbow; headlight
• N106M (ii): 1999-00; Guardian C134A & C134B—oyster hood w/blue floor brush plate logo; fog bumper; oyster/fog electric swivel elbow; headlight
• N109B: 1994-95; Epic 6500SR C102A—light sand gray hood w/navy floor brush plate logo; navy bumper; light sand gray electric swivel elbow; headlight
• N109D: 1995-97; Epic 6500SR C102D—gray hood with metallic gold floor brush plate logo; gray bumper, electric swivel elbow; headlight
• N109J: 1995-97; Centralux 1590A/E117A—gray hood w/metallic gold floor brush plate logo; gray bumper, electric elbow; headlight
• N109K: 1997-98; Epic 6500SR C102G—oyster hood w/red gold floor brush plate logo; fog bumper, electric elbow; headlight
• N114A: 1995-02; headlight, standard elbow; upgrade for various models
• N114B: 2002-?; headlight, standard elbow; upgrade for various models
• N115B: 1994-95; Ambassador III C101A—light sand gray hood w/navy floor brush plate logo; navy bumper, switch, & wand latch; light sand gray elbow, cord, & sheath
• N115F: 1995-97; Ambassador III C101G—gray hood w/metallic gold floor brush plate logo; gray bumper, elbow, cord, & sheath; black wand latch
• N115K: 1997-00; Ambassador III C101H—oyster hood w/red floor brush plate logo; fog bumper & switch; oyster elbow, cord, wand latch, & sheath
• N115L: 2000-01; Ambassador III C101J & C101L—white hood w/blue floor brush plate logo; capri bumper, switch, & wand latch; white elbow & sheath; black cord
• N115M: 2000-02; 2100 C141A—greige hood w/black floor brush plate logo; black bumper, switch, wand latch, & cord; greige elbow, & sheath
• N115N: 2002-2004; 2100 C141F—greige hood w/black floor brush plate logo; black bumper, switch, wand latch, & cord; greige elbow, & sheath
• N115P: 2002-04; 2100 C152B—greige hood w/”2100” in black & red flat cursive “by Electrolux” in red; black bumper, switch, wand latch & cord; greige elbow, & sheath
• N115Q: 2001-04; Lux 5500 C141G & C152C—white hood w/blue revised flat cursive “Lux” wordmark; capri bumper & wand latch; white elbow & sheath; black cord
• N115S: 2004-05; Ultralux C152E (80th anniversary graphic) & Ultralux C152F (80th anniversary graphic w/Aerus logo)—navy hood w/white “Ultralux” caps & white rectangle with blue “Vac” letters; greige bumper, elbow, & sheath; black cord & wand latch
• N115T: 2002-04; Lux 2000 C151B—greige hood w/ black “Lux 2000” text superimposed on a red rectangle with greige “by Electrolux” caps; black bumper wand latch & cord; greige elbow & sheath
• N115U: 2004-09; Ultralux 2000 C151C—greige hood w/black “Ultralux 2000” text superimposed on a red rectangle with greige “by Electrolux” caps; black bumper, wand latch & cord; greige elbow& sheath
• N115V: 2004-09; Lux Classic C151D—greige hood w/orange italicized “Lux” above “the original since 1924” black text; black bumper, wand latch & cord; greige elbow& sheath
• N115X: 2009-13; Lux Classic C151G—white hood w/orange “Lux” caps with a sweeping crossbar on the ‘x’ over black caps “the original since 1924”; white elbow, cord, wand latch & sheath; light gray bumper
• N115Y: 2013-14; Lux Classic C151H—black hood w/white “Lux” caps with a sweeping crossbar on the ‘x’ over black caps “the original since 1924”; black elbow, wand latch, cord, & sheath; light gray bumper
• N115Z: 2014-present; Lux Classic C151H—black hood w/white “Lux” caps with a sweeping crossbar on the ‘x’ over black caps “the original since 1924”; black elbow, wand latch, cord, & sheath; light gray bumper
• N116C: 1994-1999; new model number for 6BC; possibly upgraded
• N116D: 1994-1999; new model number for 7BC; possibly upgraded
• N137A (i): 2000-02; Epic 6500SR C102J & Centralux E130G—white hood w/blue floor brush plate logo; capri bumper; white & capri electric swivel elbow; headlight
• N137A (ii): 2002-03; Epic 6500SR C102J—white hood w/capri revised flattened cursive “Electrolux” wordmark; capri bumper; white & capri electric swivel elbow; headlight
• N137B: 2000-02; Lux 9000 C134D & C134F, Lux 5000 C101K, & Centralux E130G—white hood w/blue revised flattened cursive “Lux” wordmark; capri bumper; white & capri electric swivel elbow; headlight
• N137F: 2001-02; Guardian C134E—white hood w/capri & white “Guardian” caps & oval graphic; capri bumper; white & capri electric swivel elbow; headlight
• N137G: 2001-02; Lux 7000 C102K—white hood w/blue revised flattened cursive “Lux” wordmark; capri bumper; white & capri electric swivel elbow; headlight
• N137J: 2001-04; Lux 5000 C141C & C141E—white hood w/blue revised flattened cursive “Lux”; capri bumper; white & capri electric swivel elbow; headlight
• N137M: 2002-04; Lux 7000 C153A—white hood w/blue revised flattened cursive “Lux” wordmark; capri bumper; white & capri electric swivel elbow; headlight
• N137P: 2002-04; Guardian C154A & C154B—white hood w/blue & white “Guardian” caps & oval graphic; capri bumper; white & capri electric swivel elbow; headlight
• N137R: 2004-09; Lux Guardian C154E—white hood w/orange italicized “Lux” caps above black “the original since 1924” text; capri bumper; white & capri electric swivel elbow; headlight
• N137S: 2004-09; Lux Legacy C153C—white hood w/orange italicized “Lux” caps above black “the original since 1924” text; capri bumper; white & capri electric swivel elbow; headlight
• N137T: 2009-13; Lux Legacy C153D—white hood w/orange “Lux” caps featuring a sweeping crossbar on the ‘x’ over black caps “the original since 1924”; light gray bumper; white electric swivel elbow; headlight
• N137U: 2009-11; Lux Guardian Ultra C170A—white hood w/orange “Lux” caps featuring a sweeping crossbar on the ‘x’ over black caps “the original since 1924”; light gray bumper; white electric swivel elbow; headlight; horizontal vent slots
• N137V: 2011-13; Lux Guardian Ultra C170A—white hood w/orange “Lux” caps featuring a sweeping crossbar on the ‘x’ over black caps “the original since 1924”; light gray bumper; white electric swivel elbow; headlight; hole vents
• N137W: 2013-14; Lux Guardian Platinum C177A—black hood w/stainless steel trim plate bearing orange “Lux” caps to the left of black “the original since 1924” text; black bumper, electric swivel elbow; LED headlight
• N137X: 2014-present; Lux Guardian Platinum C177A—black hood w/orange “Lux” caps featuring a sweeping crossbar on the ‘x’ over white caps “the original since 1924”; black bumper, electric swivel elbow; LED headlight
• N137Y: 2013-2014; Lux Legacy C153E—black hood w/orange “Lux” caps featuring a sweeping crossbar on the ‘x’ over white caps “the original since 1924”; black bumper, electric swivel elbow; headlight
• N137Z: 2014-present; Lux Legacy C153E—black hood w/orange “Lux” caps featuring a sweeping crossbar on the ‘x’ over white caps “the original since 1924”; black bumper, electric swivel elbow; headlight
• N142A: 2001-03; Lux 9000 C134F (w/stiff, green-bristled HPO brush roll & black circuit breaker); blue revised flattened cursive “Lux” wordmark—white hood; capri bumper & wand latch; white/capri elbow & electric wands; headlight
• N144A: 2001-02; Lux 2000 C141B—black hood with no text or graphics; greige bumper, electric elbow
• N144G: 2002-03; Lux 2000 C141D—black hood with no text or graphics; greige bumper, electric elbow
• D146A: 2000-02; Lux Drilux Carpet Cleaning System nozzle w/white-bristled pile-lifter brush; 1.5A—greige hood; black bumper, elbow, & cord; white revised flattened cursive text on a shaded teal rectangular label
• D146B: 2002-04; Lux Drilux Plus Dry Carpet Cleaning System w/blue-bristled pile lifter brush; 1.3A—cream hood w/navy “Ultralux” caps superimposed on a navy rectangle with italicized “DriClean” text; bumper, & elbow; black cord;
• D146C: 2004-05; Ultralux Driclean Drilux Dry Carpet Cleaning System w/blue-bristled pile lifter brush; 1.3A—cream hood w/navy “Ultralux” caps superimposed on a navy rectangle with italicized “DriClean” text; bumper, & elbow; black cord
CANADA LIST (c.1963-1989); first digit of serial number is last digit of production year
(The Canadian plants closed in October 1987, but pre-production parts in light sand gray & regatta blue with the Canadian wordmark including user manuals and those with the “Made in Canada” designation were used afterward through sometime in 1989.)
• PN-1 (i): c.1963-66; Elux-O-Matic ZB88 & ZB86—cream hood w/red bumper
single cream non-detachable plastic wand; 2 short cords—one from nozzle to wand, and one on hose; circuit breaker & clean-out (revised U.S. PN-1)
• PN-1 (ii): c.1966-68; Elux-O-Matic ZB88 & ZB86—cream hood w/red bumper
red ribbed elbow with wand latch; telescopic wand; 2 short cords—one from nozzle to wand, and one on hose; circuit breaker & clean-out (revised U.S. PN-1)
• PN-1 (iii): c.1966-c.68; Elux-O-Matic ZB88 & ZB86—same as (ii) but retrofitted with telescopic elbow & wand (revised U.S. PN-1)
• PN II: c.1968-c.70; Elux-O-Matic ZB89 & ZB87—lime green hood w/moss green bumper; moss green ribbed elbow with wand latch; telescopic power wand (integrated wiring); circuit breaker & clean-out (revised U.S. PN-1)
• PN III: c.1970-71; Elux-O-Matic 89E & 87E—lime green hood w/moss green bumper; moss green ribbed corded elbow; roller bearing brush with manual adjustment slider so brush roll could be lowered as it wore down; telescopic power wand (integrated wiring) [problematic elbow contacts, noisy brush roll; and slider adjustment; riveted cover was difficult to remove and attach] (Canadian design)
• PN IV: 1971-73; Elux-O-Matic 89E & 87E—moss green hood w/lime green bumper; moss green ribbed direct-connect corded elbow; telescopic power wand; brass brush roll bearing similar to PN-1’s (revised PN-III)
• PN V: 1973-74; AP100 & AP—wheat hood w/cream bumper; cream ribbed direct-connect corded elbow; telescopic power wand; brass brush roll bearing similar to PN-1’s (recolored PN-IV)
• PN 100 (i) “Rug Saver”: 1974; AP100 & AP—wheat hood w/cream bumper; cream smooth elbow; 2-section wand w/smooth cream sheath with knurled front; PN 100 decal placed over PN-2 designation on jade sole plate (recolored U.S. PN-2)
• PN 100 (ii) “Rug Saver”: 1974-76; AP100 & AP—wheat hood w/cream bumper; cream smooth elbow; 2-section wand w/smooth cream sheath with knurled front; modified U.S. PN-2 with a hard-wired cord and hood compatibility
• PN 200 “Rug Saver”: 1976-79; AP200 & AP—yellow hood w/cream bumper; cream smooth elbow; 2-section wand w/smooth cream sheath with knurled front; modified U.S. PN-2 with a hard-wired cord and hood compatibility; production interrupted due to worker strike (recolored PN 100)
• PN 280 “Rug Saver”: 1979-82; AP280 & SAP—chocolate hood w/cream bumper; cream smooth elbow; 2-section wand w/smooth cream sheath with knurled front; modified U.S. PN-2 with a hard-wired cord and hood compatibility (recolored PN 100)
• PN 2000 (i) “Rug Saver”: 1982-85; E2000 & E-Special—almond hood w/tan bumper; tan smooth elbow with unique button clip; 2-section wand w/smooth tan sheath with knurled front; (modified U.S. PN-4A)
• PN 2000 (ii) “Rug Saver”: 1983-85; CB2000 (two-tone gray)—same as (i) but with a gray hood & parts & 3-wire cord
• PN5 “Omni-flo Automatic”: 1985-86; 2100 & L-E 2100—light sand gray hood w/floor brush plate logo; jade bumper; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath; (same as U.S.)
• PN6 (i) “Omni-flo Automatic”: 1986; Models 2100 & L-E 1623 —jade hood w/floor brush plate logo above cursive ‘Carpet & Floor’ & sans serif ‘Power Nozzle’ caps; light sand gray bumper & switch; 2-section wand w/light sand gray sheath & cord; jade elbow & wand latch; one long brush strip; equipped with on/off/reset switch
• PN6 (ii) “Omni-flo Automatic”: 1986; Models 2100 & L-E 1623 —jade hood w/floor brush plate logo above cursive ‘Carpet & Floor’ & sans serif ‘Power Nozzle’ caps; light sand gray bumper & switch; 2-section wand w/light sand gray sheath & cord; jade elbow & wand latch; one long brush strip; equipped with on/off/reset switch
• PN6A (i) “Omni-flo Automatic”: 1986-88; CVS Model 1561; grid label—jade hood w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps; light sand gray bumper & switch; jade elbow & wand latch; light sand gray cord; two short brush strips; on/off/reset switch & metal intake rungs (all PN6As)
• PN6A (ii) “Omni-flo Automatic”: 1986-87; Models 1623 & 2100 Special Edition label w/Canadian wordmark—light sand gray hood w/burgundy bumper & switch; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath; (same as U.S.)
• PN6A (iii) “Omni-flo Automatic”: 1986-87; Models 1623 & 2100 Regency Series label w/Canadian wordmark—light sand gray hood w/steel blue bumper & switch; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath; (same as U.S.)
• PN6A (iv) “Omni-flo Automatic”: 1987-88; System 90 2100 & L-E—light sand gray hood; taupe label w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps; taupe bumper & switch; light sand gray elbow, wand latch & cord; 2-section wand w/light sand gray sheath; (same as U.S.)
• PN6A (v) “Omni-flo Automatic”: 1988-89; Model 90 1623; light sand gray hood; navy label with Canadian wordmark above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps; navy bumper & switch; light sand gray elbow, wand latch & cord; 2-section wand w/light sand gray sheath; (same as U.S.)
• 6B (i) “Omni-flo Automatic”: 1986-87; L-E—light sand gray hood; grid label w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps; jade bumper & switch; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath; (same as U.S.)
• 6B (i) “Omni-flo Automatic”: 1986-87; Model L-E 1623 grid label—light sand gray hood w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps; jade bumper, switch, elbow, wand latch & cord; 2-section wand w/light sand gray sheath; on/off/reset switch & plastic intake rungs (all 6Bs; same as U.S.)
• 6B (ii) “Omni-flo Automatic”: 1987-89; Model 1623 “Special Edition” label w/Canadian wordmark—light sand gray hood w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps; burgundy bumper & switch; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath; (same as U.S.)
• 6B (iii) “Omni-flo Automatic”: 1987-89; Model 1623 “Regency Series” label w/Canadian wordmark above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps—light sand gray hood w/steel blue bumper, switch, elbow, & wand latch; 2-section wand w/light sand gray sheath
• 6BC (i) “Omni-flo Automatic”: 1986-88; Model CB2000 (light sand gray & jade; light sand gray & taupe)—same as 6B (i) except for the label & 3-wire cord
• 6BC (ii) “Omni-flo Automatic”: 1988-89; Model CB2000 (cloud gray)—gray hood w/storm gray bumper & switch; gray elbow, wand latch, & cord; label text “Prolux by” above Canadian wordmark w/English & French sans serif ‘Power Nozzle’ ; 2-section wand w/gray sheath; 3-wire gray or red cord (direct marketing model)
• 7B (i) “Omni-flo Automatic”: 1986-87; Model Hi-Tech 2100 grid label w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps—light sand gray hood; jade bumper & switch; 2-section wand w/light sand gray sheath, elbow & wand latch; on/off/reset switch, plastic intake rungs & extra intake air channel (all 7Bs)
• 7B (ii) “Omni-flo Automatic”: 1987-89; Model 2100 “Special Edition” label w/Canadian wordmark—light sand gray hood w/floor brush plate logo above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps; burgundy bumper & switch; light sand gray elbow & wand latch; 2-section wand w/light sand gray sheath; (same as U.S.)
• 7B (iii) “Omni-flo Automatic”: 1987-89; Model 2100 “Regency Series” label w/Canadian wordmark above English & French ‘Carpet and Floor Power Nozzle’ sans serif caps—light sand gray hood w/steel blue bumper, switch, elbow, & wand latch; 2-section wand w/light sand gray sheath
• 7BC “Omni-flo Automatic”: 1988-89; Model CB 2000 (cloud gray)—gray hood w/label text: Canadian wordmark w/English & French sans serif ‘Power Nozzle’; storm gray bumper, switch, elbow & wand latch; 2-section wand w/gray sheath; 3-wire gray or red cord (direct sales model)
_________
U.S./CANADA CENTRAL VACUUM SYSTEM POWER NOZZLES (speculative)
I'm guessing that each succeeding model was introduced along with the other new cylinders, uprights,commercials, and shampooer-polishers; so that's where I got the years.
PN6A (jade hood; grid label): 1986-88 Model 1561 "Central Vacuum Cleaner" sand/jade
PN6A: (navy label); 1988-89 Model 1569 "Central Vacuum Cleaner" stainless steel/black
1622: 1989-91 Model 1580 "Central Vacuum Cleaner" stainless steel/black
1692: 1991-93 Model 1584 "Central Vacuum Cleaner" hammertone black/black
1684: 1993-94 Model 1590 "Central Vacuum Cleaner" hammertone black/black (floor brush plate logo)
1684: 1994-95 Model 1590A/E117A "Central Vacuum Cleaner" hammertone black/black
N109J: 1995-97 Model E130A "Centra Lux" hammertone black/black (serif white caps superimposed on a large gray scripted C in a white oval; floor brush plate logo)
N106L: 1997-98 Model E130B "Centra Lux" hammertone black/black; oyster with red floor brush plate logo and fog bumper
N106M (red logo) or N106M (blue logo): 1998-2002 Model E130B "Centra Lux" hammertone black/black
N137M: 2002-03; Model E130F "Centra Lux" hammertone black/black (serif white caps superimposed on a large gray scripted C in a white oval; Aerus logo w/flattened cursive “by Electrolux”; Made in America flag decal)
N137P: 2004-09; Model E130G "Centra Lux" hammertone black/black (script “Centra” large orange LUX letters; Aerus logo)
N137S: 2009-2013; Model E130J "Centra Lux" stainless steel/black (script “Centra” & large white LUX letters; Aerus logo)
N137Z: 2014-present; Model E130K "Centra Lux" stainless steel/black (white caps with sweeping crossbar on the ‘X’)
There's also the Model E130H "Condo Lux" for smaller dwellings made since 2008 whose pn’s may have corresponded to the contemporaneous larger units.