|
Thread Number: 45459
/ Tag: 50s/60s/70s Vacuum Cleaners
opinion on this kirby attachment. |
[Down to Last] |  |
| Post# 470567 4/8/2024 at 22:20 by vacuser (milford,ohio) | ||
seems this is a fail for me.not much air pressure is produced by the kirby.when i used it,it was very slow to inflate my pool float. anyone else try this ?
View Full Size
| ||
Post# 470570 , Reply# 1 4/8/2024 at 22:34 by KirbyClassicIII  (Milwaukie, Oregon) |
||
vacuser
Dwayne,
This is best used with models Dual Sanitronic 50 onward. It was first introduced with the Kirby Classic III's tool set. With the hose end attached to where the bag goes, it can be used to inflate balloons and other inflatables; but if you use this with the hose end attached up front, it can then be used to deflate things as well as clean certain nooks and crannies other tools can't get. ~Ben | ||
| Post# 470572 , Reply# 2 4/9/2024 at 02:32 by huskyvacs (Gnaw Bone, Indiana) | ||
 I never had problems with it other than the fact that the nozzle size is specific to very few inflatables. Make sure it is a snug fit and is able to go past the check valve flapper in the inflatable's nozzle. I've never used mine but probably once to fill and air mattress and that was like...20 years ago. | ||
| Post# 470582 , Reply# 4 4/9/2024 at 11:39 by human (Pines of Carolina) | ||
 | ||
|
Post# 470591 , Reply# 5 4/9/2024 at 18:09 by KirbyClassicIII (Milwaukie, Oregon) |
||
|
tolivac | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
