|
Thread Number: 45319
/ Tag: 50s/60s/70s Vacuum Cleaners
yipppi yay yahoooo |
[Down to Last] |  |
Post# 469392 2/8/2024 at 14:34 by Thevacomaticiec  (Bathurst New Brunswick Canada ) |
||
 my Compact Electra C8 wands were stuck together i finale broke it free with heath gun and very very very 🔥🔥🔥🔥🔥🔥hot WATER Steam dis the trick yay. poor water over the wand until red hot let cool twist with gloves on and voila a lil banging on side helps too but i got em free .
View Full Size
| ||
|
Post# 469393 , Reply# 1 2/8/2024 at 14:39 by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
| Post# 469398 , Reply# 2 2/8/2024 at 15:24 by Lesinutah (Utah) | ||
If | ||
|
Post# 469401 , Reply# 3 2/8/2024 at 16:14 by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
| Post# 469405 , Reply# 4 2/8/2024 at 17:25 by huskyvacs (Gnaw Bone, Indiana) | ||
 | ||
| Post# 469411 , Reply# 5 2/8/2024 at 22:32 by Lesinutah (Utah) | ||
|
I | ||
| Post# 469413 , Reply# 6 2/8/2024 at 22:42 by huskyvacs (Gnaw Bone, Indiana) | ||
|
Wands that have been assembled together for a long time will eventually stick together from expansion and contraction and stay like that, or corrode in place. That is why they came off when he poured boiling water on them, as after they cooled they shrunk again which allowed them to separate. Electrolux wands are well known for doing this, and that's why you never store wands away assembled, always leave them separated. | ||
| Post# 469414 , Reply# 7 2/9/2024 at 01:17 by beevac (Kewanee) | ||
|
wands that are frozen together the advise to use a heat gun is great since water can cause rusting of steel wands. Then drop the assembled wands on the carpet & the vibration will do the rest. | ||
|
Post# 469422 , Reply# 8 2/9/2024 at 14:12 by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
