|
Thread Number: 45270
/ Tag: Recent Vacuum Cleaners from past 20 years
Hoover/Oreck Canister Wheel Needed |
[Down to Last] |  |
| Post# 469025 , Reply# 1 1/28/2024 at 09:19 by Blackheart (North Dakota) | ||
Wow!
The parts availability for this seem to be awful! the schematic I found on partswarehouse doesn't even break down the main canister it just shows it at one unit. I checked Essco.net which only had categories for a few pieces, no wheels to be found.
Other than finding a parts donor one possible hope for this unit might be 3d printing, I've worked with a local guy who does 3d scanning. so if you can find someone who does that and prints you may be able to get a reproduction made. Is it going to be as good as the OEM product? Probably not but when options are so limited it might do....
View Full Size
| ||
| Post# 469052 , Reply# 2 1/28/2024 at 22:42 by huskyvacs (Gnaw Bone, Indiana) | ||
 I think Hoover intended the entire unit to be replaced as one piece, no parts. This vacuum came out in...2006 I think? I agree on a 3D printed wheel as a fill-in until you find parts. There is an entire canister on eBay right now but it's $60 with nothing but the canister. Could swap all your hoses and bits to that model and use the missing wheel one you have now as a parts unit. | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}