|
Thread Number: 45135
/ Tag: Recent Vacuum Cleaners from past 20 years
About LEDs in Vacuums.... |
[Down to Last] |  |
| Post# 467867 12/3/2023 at 00:57 by RoyalFan103 (Washington) | ||
Do they tend to screw with Cirtcuitry within a vacuum whenever one is installed? While the LEDs work Fine on my Other Hoovers. For some reason with my Savvy, the Sensor lights don't work properly despite the sensor itself being clean. I still need to test it fully with the Original Bulb that came with it as I didn't test it with that bulb.
| ||
| Post# 467888 , Reply# 1 12/3/2023 at 22:38 by panasonicvac (Northern Utah) | ||
They shouldn't | ||
| Post# 467957 , Reply# 2 12/7/2023 at 23:15 by RoyalFan103 (Washington) | ||
|
You're right. | ||
| Post# 467972 , Reply# 3 12/8/2023 at 17:32 by RoyalFan103 (Washington) | ||
|
| ||
| Post# 468001 , Reply# 4 12/10/2023 at 14:58 by huskyvacs (Gnaw Bone, Indiana) | ||
 | ||
| Post# 468038 , Reply# 5 12/11/2023 at 22:51 by RoyalFan103 (Washington) | ||
|
| ||
| Post# 468071 , Reply# 6 12/12/2023 at 23:24 by RoyalFan103 (Washington) | ||
|
These are the Inner Workings of the Dirt Sensor Assembly in the Savvy if ya’ll want to see them.
View Full Size
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
