|
Thread Number: 44911
/ Tag: 80s/90s Vacuum Cleaners
Kirby G3 |
[Down to Last] |  |
| Post# 466296 9/18/2023 at 10:36 (241 days old) by VacsofProsper (TX) | ||
 | ||
| Post# 466301 , Reply# 1 9/18/2023 at 14:58 (241 days old) by human (Pines of Carolina) | ||
I refurbished a G3 a couple of summers ago. I didn't dig too deeply into the inner workings of the motor, since it was running okay, but I did have to knock the directional control on the transmission loose with a light tap of a hammer, since it was stuck in reverse. All of the G series machines, from the G3, right up through today's Avalier, are all pretty much the same under the skin. Most of the parts are interchangeable.
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}