|
Thread Number: 44904
/ Tag: Recent Vacuum Cleaners from past 20 years
Disassemble my vac |
[Down to Last] |  |
| Post# 466226 , Reply# 1 9/16/2023 at 14:01 (243 days old) by Vacuumman (California) | ||
|
Video Here's a video of someone disassembling a similar vacuum. CLICK HERE TO GO TO Vacuumman's LINK | ||
| Post# 466232 , Reply# 2 9/16/2023 at 19:17 (243 days old) by human (Pines of Carolina) | ||
 | ||
Post# 466233 , Reply# 3 9/16/2023 at 21:35 (243 days old) by Kloveland  (Tulsa) |
||
Your valve (the dial on top) likely has broken plastic inside. You can either replace the valve or disconnect the tube, connecting it to the switch. If it were me, I would just replace the valve. But either way you’ll have a functioning vacuum again.
I’m not sure why those valves break so much.. maybe people jerk the knob too hard on the top? I currently have about 15 plastic bodied canisters in my collection.. and I’ve sold quite a few on eBay over the years and I’ve seen this issue with the valves in a couple of them. | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
