Thread Number: 44867  /  Tag: Small Appliances
Black and Decker Classic Iron
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 465733   9/1/2023 at 16:28 (250 days old) by fan-of-fans (USA)        

fan-of-fans's profile picture
I’ve posted about these before but can’t find the thread. I have one of these brand new in the box that I bought at Walmart a few years ago with a gift card. I believe John has the same iron, it looks just like he 1950s-70s GE irons.

I also have one I got recently in a thrift store, I’d guess it’s maybe 10 years old or less, it’s nearly identical to the one I bought new, except this one has the older B&D logo and the other has the new logo.

Anyway, I finally got around to using it (the thrift store one) as I don’t iron much at all but had a wrinkled shirt to do. The other one in box I’ve never used yet.

What I noticed is when I first turned it on, the light on the side was green. But after a few minutes as it was preheating, it started flashing red. Is it supposed to do that? I thought maybe it had to do with the automatic shutoff feature, but it seems premature as I’d just let it sit to preheat.

After I picked it up it turned green again but it just seemed to keep changing to red pretty often.

Other than that it seemed to get hot and work fine.

The only other thing that concerned me is the heel rest is made of the same chromed metal as the body of the iron and seems to get quite hot as well. Not nearly as hot as the actual aluminum sole plate, but still quite hot. I was kind of afraid to sit it down to cool off after I finished using it. Could it start a fire? I’ve used other plastic irons before and their heel rest stays cool.

If John or anyone else could chime in on these two things, I’d like to know.


  View Full Size
Post# 465754 , Reply# 1   9/1/2023 at 22:34 (250 days old) by human (Pines of Carolina)        
GE holdover...

human's profile picture
We had the original GE iron like that when I was a kid. I remember that it got hot all over. Black & Decker acquired GE's small appliance division sometime back in the '80s, and that was one of the products that remained largely unchanged under the Black & Decker label. The iron I have now is a Black & Decker from the '80s, same basic design, but with an almond colored plastic upper body. I think have snagged it from our family's beach house before it was sold. I was in the process of moving after my divorce when all that went down. I see those chrome ones occasionally at thrift shops for not much money.

Post# 465755 , Reply# 2   9/2/2023 at 00:28 (250 days old) by Gottahaveahoove (Pittston, Pennsylvania, 18640)        
Am I the John in reference?

gottahaveahoove's profile picture
I had 2 of these. Yes, that green light on the side tells us it is on... changes after it sits dormant, etc. It worked well. For years... and was replaced by the second. I believe the 1st one fell to the floor. The heat of the whole unit was never an issue . I like the weight of it, too.

Post# 465764 , Reply# 3   9/2/2023 at 08:29 (249 days old) by fan-of-fans (USA)        

fan-of-fans's profile picture
It seems like everyone had those almond Black and Deckers, both of my grandparents had them.
you’re right, I believe it was in 1984, that the sale happened.

There’s another Black and Decker I’ve seen that is almond with a maroon handle. This model would beep or more accurately “chirp” when it had reached temperature, and then, would chirp again a few times and shut itself off if you didn’t move it after so many minutes. It also had red and green lights to show if it was heating or up to temp. In fact, I believe it may have been the very first iron to have auto shutoff. It’s be a neat one to find, but so far haven’t come across one.

I see these chrome B&D irons in thrift stores pretty often, although on some the chrome is rusty and the cord housing broken off. Sometimes I also see older GE travel irons or the blue plastic GE models.

Yes John, it was you that I remember having these. Good to know the heel rest is safe.

I remember my mom would always sit the iron on the dryer or the (cool) stove after she used it so it could cool down. She was always afraid of that or the hot curling iron causing a fire.


Post# 470923 , Reply# 4   4/26/2024 at 21:41 by Human (Pines of Carolina)        

human's profile picture
I was killing time at Goodwill this evening before I had to go to a meeting, and I found a probably early 1960s vintage GE steam iron, similar to the Black & Decker Classic pictured in the original post. It's a more deluxe model with a spray function, and its handle is white, instead of black, with a blue, cloth-covered cord. Before I laid down my $3 for it, I did plug the thing in for about 30 seconds, and it heated up immediately. Looking at it next to my Black & Decker Light and Easy iron, they definitely share quite a bit of DNA in common. Interestingly, the Black & Decker iron is a more entry level model, without a spray function.

I'm off to bed right now, but I'll post photos of both irons tomorrow.


Post# 470929 , Reply# 5   4/27/2024 at 12:29 by Human (Pines of Carolina)        
Iron photos...

human's profile picture
Okay, as promised, here are some photos of both my new (to me) GE iron and my B&D 'Light & Easy' iron. It's pretty obvious from the photos that they share a significant amount of DNA; in fact, the B&D iron is a rebadged GE product. I'm guessing they're about 20 years apart in age. I've never even heard of some of the synthetic fabrics referenced on the GE's label. The GE is definitely the larger and heavier of the two. I think it's in quite good shape for its age. It should look quite nice after a light cleaning. I'm not sure what the dried brown droplets are on the handle, but they flick right off with a fingernail.

It was funny when I was checking out, the cashier was teasing me about how that old iron was going to drive up my electric bill and blow my circuit breakers. According to the ratings plate on the bottom, it pulls 1,100 watts, which is less than most hair dryers. I'm guessing a modern iron would be similar. Shows how much that guy knew.

Enjoy...


  Photos...       <              >      Photo 1 of 9         View Full Size
Post# 470932 , Reply# 6   4/27/2024 at 13:07 by fan-of-fans (USA)        

fan-of-fans's profile picture
Neat! I’ve seen some similar ones at tag sales, I saw an older looking one at a thrift store this week, it was all black and chrome with a black and white fabric cord.

The color scheme on that one is quite nice though.


Post# 470950 , Reply# 7   4/28/2024 at 13:55 by Human (Pines of Carolina)        

human's profile picture
I spent a few minutes scrubbing on the iron with a Tub-o-Towels wipe, and it really came out nice. The crud in the crevices and almost all of the little flecks are gone, except a few that are actually nicks in the white enamel. The thing is not perfect, by any means, but it is now very presentable.


Post# 471003 , Reply# 8   5/1/2024 at 15:01 by kirbyklekter (Concord,Ca.)        
Tip:

IF you were to actually use these irons, I would do this as a precaution first. Pour some distilled water and a tbsp. of CLR in and heat just hot enough for steam. Press steam button a few times then unplug and wait an hr. or so then repeat. Then pour the rest out and rinse out with distilled water. It can help remove mineral build up. Some people just used tap water!

I wrecked a shirt collar once when I hit the surge of steam button and rusty water came out. MY mom had a metal iron rest that attached,slid on, for sitting the iron on while idling or cooling after use. Don't know if they still make them anymore.

FWIW: My dad worked at GE for 20 yrs. and said that two things GE made well were electric motors and steam irons!


Post# 471166 , Reply# 9   5/8/2024 at 18:03 by JustJunque (Western MA)        

justjunque's profile picture
Both are quite nice. But, there's something about the colors and details of the GE that just hit me in the feels. I wonder if my mom had one identical, or nearly identical, when I was a lad.

Post# 471175 , Reply# 10   5/8/2024 at 20:02 by Human (Pines of Carolina)        
Agreed

human's profile picture
The Black & Decker iron really doesn't speak to me, beyond just being a functional, basic iron. When I saw the GE at the thrift store, it just kind of visually jumped out at me from the shelf. I didn't think much about it at the time, but since I've had it, I'm thinking Mom may have had one like it after the black one, but perhaps a later version with the plastic spray nozzle. I just don't remember whether that was a GE or something else.


Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy