|
Thread Number: 44765
/ Tag: 80s/90s Vacuum Cleaners
Dirt devil deluxe upright with LED lightbulb |
[Down to Last] |  |
| Post# 465026 8/2/2023 at 10:00 by VacsofProsper (TX) | ||
 | ||
| Post# 466819 , Reply# 2 10/16/2023 at 11:11 by VacsofProsper (TX) | ||
|
Today I managed to get the hood off and it was a little tricky but luckily there was a video on how to do it. I installed the new LED lightbulb and unfortunately it didn't work. Both of them are double insulated. Is there another bulb where it should have the proper end?
View Full Size
| ||
Post# 466827 , Reply# 3 10/16/2023 at 14:47 by Kloveland  (Tulsa) |
||
 | ||
| Post# 466837 , Reply# 4 10/16/2023 at 18:52 by panasonicvac (Northern Utah) | ||
Odd
I just bought one of those LED lights for my Sanitaire S677 and it works just fine. Was your old lightbulb working before?
www.amazon.com/IAlight-AC... | ||
| Post# 466838 , Reply# 5 10/16/2023 at 20:53 by VacsofProsper (TX) | ||
|
| ||
| Post# 466839 , Reply# 6 10/16/2023 at 20:56 by VacsofProsper (TX) | ||
|
| ||
| Post# 466841 , Reply# 7 10/16/2023 at 21:53 by vacuumman (California) | ||
|
Bulb Did you check the bulb in another machine to see if it isn't a dud? The only other thing I can think of is that the contacts in the new bulb are not touching the contacts in the socket. | ||
| Post# 466842 , Reply# 8 10/16/2023 at 22:11 by VacsofProsper (TX) | ||
|
| ||
|
Post# 466844 , Reply# 9 10/17/2023 at 08:36 by kloveland (Tulsa) |
||
|
One of the models I had required a 12 volt bulb. Maybe it was the 12 amp model. I currently have one of the older deluxe models. Here is a thread I found when researching the part number.
CLICK HERE TO GO TO kloveland's LINK | ||
|
Post# 466950 , Reply# 10 10/20/2023 at 17:49 by Kloveland (Tulsa) |
||
|
So the Manual I had in my 7200 does say 12 V lightbulb. Have you tried that?
View Full Size
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}