|
Thread Number: 44747
/ Tag: 80s/90s Vacuum Cleaners
2 for 1 |
[Down to Last] |  |
Post# 464877 7/28/2023 at 15:43 (293 days old) by Thevacomaticiec  (Bathurst New Brunswick Canada ) |
||
getting 2 power head nozzle and a wand for next to nothing tomorrow yayy no more having switch wands all the time .
View Full Size
| ||
|
Post# 464878 , Reply# 1 7/28/2023 at 15:43 (293 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
|
Post# 464883 , Reply# 2 7/28/2023 at 18:28 (293 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
is this nozzle a Wessel werk German made or Numatics floor tool just got it from Canadian tire today for 28$. sticker says Duravac but looks similar. This post was last edited 07/28/2023 at 21:11 | ||
| Post# 464887 , Reply# 3 7/28/2023 at 20:57 (293 days old) by Lesinutah (Utah) | ||
Nice | ||
|
Post# 464888 , Reply# 4 7/28/2023 at 21:09 (293 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
|
Post# 464925 , Reply# 5 7/30/2023 at 07:01 (291 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
there she be pull it self along the rug nicely quiet too nice head light too yayyyy. Sure makes cleanening whit ky lux zb 89 work good yayyyy. I am very happy with how this power head performs on my lux 89 i havea spare pn that wont turn on nothing il have to look into it but for now im enjoying my new pn 50 for wand and 2 pn i call that a deal This post was last edited 07/30/2023 at 10:24 | ||
|
Post# 464926 , Reply# 6 7/30/2023 at 07:13 (291 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
This post has been removed by the member who posted it. | ||
|
Post# 464933 , Reply# 7 7/30/2023 at 12:36 (291 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
yesss
| ||
|
Post# 464936 , Reply# 8 7/30/2023 at 13:22 (291 days old) by JustJunque (Western MA) |
||
 | ||
|
Post# 464946 , Reply# 9 7/30/2023 at 15:50 (291 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
| Post# 464947 , Reply# 10 7/30/2023 at 16:57 (291 days old) by kirbylux77 (London, Ontario, Canada) | ||
Nice score Antoine! That would be a PN6 you got there. Take the other non working powerhead into your Aerus dealer, chances are it's the 3 way toggle switch on the powerhead that went bad. It's highly unlikely the motor itself went dead. That switch is discontinued, but they can replace it with the switch & breaker used on the Aerus Classic powerhead.
| ||
|
Post# 464948 , Reply# 11 7/30/2023 at 16:58 (291 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
the closest dealer from me is 4 hours away and i dont have a car .... its in Riverview 5h away or Fredericton witch is even further with no car its kinda tuff This post was last edited 07/30/2023 at 17:14 | ||
|
Post# 464949 , Reply# 12 7/30/2023 at 17:54 (291 days old) by JustJunque (Western MA) |
||
|
One of my Epic 6500 power nozzles had no power when I got it.
I'm not sure if it's the same as yours. I know the part that attaches to the wand is different, but maybe they work the same way internally? Anyway, on mine, there was a wire that had come loose because of the elbow (or neck?) moving. I opened up the power nozzle, reconnected the wire, and it worked like new. It would be great if yours is the same! Barry | ||
|
Post# 464950 , Reply# 13 7/30/2023 at 18:02 (291 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
|
Post# 464978 , Reply# 14 7/31/2023 at 16:23 (290 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
a hose change later so that it stays in machine better and i have a lux handle other one was to short for my liking . And she looks factory and i hear suction all the way to the pn.
View Full Size
| ||
| Post# 464980 , Reply# 15 7/31/2023 at 16:53 (290 days old) by kirbylux77 (London, Ontario, Canada) | ||
|
Looks very nice with the new hose Antoine. Where did you get that from? And what machine was it from?
Your 89 is a early model, likely from 1967 to 1969. The early models had the chrome top trim, like yours. After 1970, the top trim was painted green until the AP100 was introduced in late 1973. I hope you can get the second powerhead working....perhaps try taking the switch from the working powerhead and see if that's the issue? Then at least you know for sure what can be saved for parts if you decide not to get the broken parts replaced and repair it at home. | ||
|
Post# 464981 , Reply# 16 7/31/2023 at 17:15 (290 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
|
Post# 465006 , Reply# 17 8/1/2023 at 15:11 (289 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
|
Post# 465053 , Reply# 18 8/3/2023 at 12:25 (287 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
|
Post# 465077 , Reply# 19 8/3/2023 at 18:36 (287 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
|
Post# 465100 , Reply# 20 8/4/2023 at 14:56 (286 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
|
Post# 465116 , Reply# 21 8/5/2023 at 11:57 (285 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
any advice be helpfull ty Switcfh rocks back and fort cord rewind pluggged in properly hsoe tto and bag aqnd rod from door to switch for the shut off mooves freely dial on 5 and 6 but no go no turning on nothing deader than a door nail This post was last edited 08/05/2023 at 12:41 | ||
|
Post# 465117 , Reply# 22 8/5/2023 at 12:48 (285 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
what could be wrong marette feels tight nothing seems out of place soooo confused. I can turn the motor by hand anbd its spins freely and smooth plug her in switch clicks no motor noise nothing dead .
to my eyes witrh flashlight carbon brush seem ok im soooo confused it would cut out during use then i can switch her on again and keep cleaning then poof nothing dead today | ||
|
Post# 465181 , Reply# 23 8/8/2023 at 14:09 (282 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
| Post# 465189 , Reply# 24 8/8/2023 at 21:48 (282 days old) by kirbylux77 (London, Ontario, Canada) | ||
|
Antoine, my bet is it's a bad power switch based on what you described is happening. Take note of how the vacuum is wired, then unhook the motor wires, and hard wire them to a old power cord. Plug it right into the wall - if the vacuum powers up, it's either the switch or cord rewinder causing issues. It could also be bad contacts in the cord rewinder too, but you would know that if the power fluctuates by pulling the cord in and out.
| ||
|
Post# 465192 , Reply# 25 8/9/2023 at 06:01 (281 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
|
Post# 465196 , Reply# 26 8/9/2023 at 11:38 (281 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
hows this looks
View Full Size
| ||
|
Post# 465197 , Reply# 27 8/9/2023 at 11:43 (281 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
clean the contacts tryed it nothing..... try it with cord out all the way and back in no go dead i nthe water switch or cord reel she would slowly gert to full rpm then power on fully for4 months like on vrrrr then VRRRRRRRR full power so i think some thing was failing and now its done for what i dont know burn out maybe ? | ||
| Post# 465205 , Reply# 28 8/9/2023 at 19:27 (281 days old) by Lesinutah (Utah) | ||
|
Nice
Great Job on the 2 power nozzles. I'm no electrolux fan but yours looks nice.
I got a blue newer patriot with a wessell werk ebk360 power nozzle. The patriot is basically a pig. I still got my c9 I use the heck out of with a eureka power nozzle. The eureka nice but it's not close to what you have. So I too have 2 pigs now for my daily drivers. I like my c9 you helped me get the best. | ||
|
Post# 465211 , Reply# 29 8/10/2023 at 02:18 (281 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
| Post# 465213 , Reply# 30 8/10/2023 at 06:09 (280 days old) by ilovehoovers (England) | ||
Reply #2 | ||
|
Post# 465218 , Reply# 31 8/10/2023 at 11:48 (280 days old) by Thevacomaticiec (Bathurst New Brunswick Canada ) |
||
|
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}