|
Thread Number: 44727
/ Tag: Recent/New Polishers/Floor Care Products
Extractor pump and regulators? (upgrading a mytee) |
[Down to Last] |  |
| Post# 464744 7/21/2023 at 18:26 (300 days old) by Blackheart (North Dakota) | ||
Just in case we have anyone out there familiar with commercial extractors I thought i'd put this out there.
I picked up this mytee a while back for $50 with the intention of restoring it for personal use. It's specs were pretty weak 100 PSI 100 CFM 130" I bought this pumptec pump (new condition) from ebay which is for a Windsor compass 2 and rated for 700 psi which would be excessive for the application so I figured a new regulator or unloader would be in order. It was like half the cost of the 300 PSI pumptec 112 i was looking at, couldn't pass up that deal! For those who are familiar with the pump side of things Would it be better to use a static pressure regulator or perhaps to get a variable pressure unloader? I'm thinking it'd be best to bring it down to like 400 psi The vacuum motor i'll be looking to upgrade to a dual stage 6.6 motor with specs around 130 for both lift and airflow. | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}