Thread Number: 41804  /  Tag: 50s/60s/70s Vacuum Cleaners
Disassembling Electrolux Model G
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items
Post# 441794   5/14/2021 at 05:59 by vacuumman (California)        

I have an Electrolux Model G in relatively poor shape and I am trying to restore it. One of the bumpers has some large scrapes in it and I would like to remove it. I tried disassembling the machine, but it looks like I have to remove the bag chamber in order to remove the bumpers. Is there an easy way to do this? Also, the cord winder mechanism on my machine is broken. Is there an easy way to swap the internals from another cord winder into the metal housing?
Thanks.





Post# 441797 , Reply# 1   5/14/2021 at 07:04 by rugsucker (Elizabethton TN)        
Model G

Bumpers-The bumpers remove from the rear at cordwinder.There is a rubber clip molded into the bumper that fits in a slot in the polished CW cover.The bumpers should be held at the rear 4 inches and pulled rearward and toward the center.This is much easier if bumpers are warm from hair dryer or sitting in hot sun.
Cordwinder-After removing handle assembly,terminals from CW to switch & rear of bumpers you will find screws.CAUTION-With any cordwinder if the spring is loose it CAN CUT YOU in about 2 seconds!!It may be best to change entire CW.
Good luck.Elux G is one one the great vacs.I use 2,blue rebuilt dailt & nice tan G weekly.


Post# 441808 , Reply# 2   5/14/2021 at 14:47 by vacuumman (California)        
Rugsucker

So once you remove the bumper from the polished cover, how can you remove the bumper from the machine's body?

Post# 441809 , Reply# 3   5/14/2021 at 15:44 by rugsucker (Elizabethton TN)        
Bumper

The bumpers have a metal back along the main body of the G with horizonal slots that fit over metal pins from the body.For this you do remove the bag chamber.

Post# 441813 , Reply# 4   5/14/2021 at 16:10 by vacuumman (California)        
Bag Chamber

In that case, how can I remove the bag chamber?

Post# 441930 , Reply# 5   5/18/2021 at 06:04 by vacuumman (California)        
Bag Chamber

Does anyone know how to remove the bag chamber?

Post# 441965 , Reply# 6   5/19/2021 at 07:16 by rugsucker (Elizabethton TN)        
Bag chamber

There are screws top & bottom.For the bottom screw remove clip on pin that door hinges on.Tap gently from smaller,smooth side to remove pin.




Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy