Thread Number: 41558
/ Tag: Pre-1950 Vacuum Cleaners
1930s Apex Restoration |
[Down to Last] |
Post# 440265   3/24/2021 at 17:30 (1,129 days old) by myvacsrock (USA)   |   | |
Checkrate/Likes
 
3    
Enjoy! |
Post# 440266 , Reply# 1   3/24/2021 at 17:32 (1,129 days old) by myvacsrock (USA)   |   | |
Checkrate/Likes
 
4    
- CLICK HERE TO GO TO myvacsrock's LINK |
Post# 440268 , Reply# 3   3/24/2021 at 18:24 (1,129 days old) by huskyvacs (Gnaw Bone, Indiana)   |   | |
Checkrate/Likes
 
     
Thanks for sharing the resto pics, when I see vacs with that mottled aluminum on it - I always thought that was the finish they came in - but now I see it's about 100 years of heavy tarnishing.
Did you polish the emblem at all? I have a Bee Vac I tried to polish the emblem on and I started with a tiny area and the ink started coming off so I stopped immediately. All I used was just a tiny bit of Windex just because I was trying to read the serial number, maybe the ammonia in it reacted with the old printed ink. |
Post# 440269 , Reply# 4   3/24/2021 at 18:41 (1,128 days old) by myvacsrock (USA)   |   | |
Checkrate/Likes
 
     
This was the 30s, so it wouldn’t have come with a matte finish that late. Most of the early Hoovers did have a matte finish, though. |
Post# 440272 , Reply# 5   3/24/2021 at 19:41 (1,128 days old) by Brando_husky (Las Vegas Nevada)   |   | |
Checkrate/Likes
 
1    
30s loved their polished aluminum. |
Post# 440290 , Reply# 6   3/25/2021 at 09:25 (1,128 days old) by VacMadMan (Pueblo Co.)   |   | |
Checkrate/Likes
 
     
|
Post# 440296 , Reply# 7   3/25/2021 at 12:10 (1,128 days old) by OhioVacuums (Ohio)   |   | |
Checkrate/Likes
 
     
Whoooa...very nice. Are you selling it ? I'm interested if you are.. |
Post# 440297 , Reply# 8   3/25/2021 at 12:24 (1,128 days old) by myvacsrock (USA)   |   | |
Checkrate/Likes
 
     
Yes, it is for sale |
Post# 440303 , Reply# 9   3/25/2021 at 14:57 (1,128 days old) by OhioVacuums (Ohio)   |   | |
Checkrate/Likes
 
     
I'll be bidding.. thanks |
Post# 440321 , Reply# 10   3/25/2021 at 23:36 (1,127 days old) by BetaM64 (Avonmore, Pennsylvania, USA)   |   | |
Checkrate/Likes
 
     
Another excellent restoration, as always! I have to ask, what's your process for polishing the aluminum? I see some sandpaper and Mother's Mag & Aluminum in this picture, and want to invest in some supplies to get my machines looking like new! |