|
Thread Number: 41416
/ Tag: Brand New Vacuum Cleaners
Rainbow E2 Black vs Sebo D4 cleaning |
[Down to Last] |  |
| Post# 439116 , Reply# 1 2/24/2021 at 11:29 (1,157 days old) by dysonman1 (the county) | ||
 | ||
| Post# 439150 , Reply# 2 2/25/2021 at 09:23 (1,156 days old) by Tekjunkie28 (Western Va) | ||
|
I talked to my dealer and they will send me a softer brush to see if that changes anything. They offered it for free but I don't know of that will make a difference. Thoughts? | ||
| Post# 439168 , Reply# 3 2/25/2021 at 15:02 (1,155 days old) by Evilvacuumman (Los Angeles) | ||
 | ||
| Post# 439209 , Reply# 4 2/26/2021 at 18:55 (1,154 days old) by Tekjunkie28 (Western Va) | ||
|
I have the blue one now. Is there anything that can be done? I like the machine but just feel the PN is slow/underpowered. | ||
| Post# 439278 , Reply# 5 2/28/2021 at 10:56 (1,153 days old) by Mike811 (Finland) | ||
 | ||
| Post# 439305 , Reply# 6 2/28/2021 at 22:24 (1,152 days old) by Tekjunkie28 (Western Va) | ||
|
Mike. What would you think my problem is? Not lowering the PN enough? | ||
| Post# 439317 , Reply# 7 3/1/2021 at 08:05 (1,152 days old) by Mike811 (Finland) | ||
|
| ||
| Post# 439321 , Reply# 8 3/1/2021 at 11:15 (1,152 days old) by Tekjunkie28 (Western Va) | ||
|
Ok thanks. I had been using 4 and 3. 3 might be okay but my carpet has a lot of wear and it's matted down pretty good in one spot. | ||
| Post# 439369 , Reply# 9 3/3/2021 at 15:04 (1,149 days old) by compuvac ( ) | ||
 | ||
| Post# 439399 , Reply# 10 3/4/2021 at 16:36 (1,148 days old) by Tekjunkie28 (Western Va) | ||
|
@compuvac oh yea for sure the rainbow might make it look like you picked up more dirt but if I vacuum after I use the Sebo I get A LOT of dirt back. | ||
| Post# 439413 , Reply# 11 3/5/2021 at 02:10 (1,148 days old) by compuvac ( ) | ||
|
| ||
| Post# 439436 , Reply# 13 3/5/2021 at 15:43 (1,147 days old) by compuvac ( ) | ||
|
I think the red light comes on when it's too high or when something is blocking the brush from spinning.
Try this Get some salt put just a little bit in-front of the ET-1. Put it on the highest setting and keep lowering it until you can see the salt jumping. That's how you know when you hit the right height. | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}