Hi all, my UltraCaptic was recently used to clean up after some poor houseplants demise and is caked with dirt on the first cyclone and mesh screen. I have removed all visible screws and have hit a road block. I have no idea what else to check for to get this unit apart to give it the spa day it deserves.
I have checked under both foot pedal switches, no screws. Removed the front swivel wheel and that did nothing... I’m at a loss as how to get into this thing and get it apart. Anyone have any secrets they’d be willing to share? I’ve attached a couple photos where I’ve gotten screws out, if that helps. I’ve removed all screws behind the dust cup, and I can only get to 2 of the ones behind the cyclones before the post motor filter.