|
Thread Number: 40096
/ Tag: Wanted to Buy Items
Brush strips for Hoover concept one & two |
[Down to Last] |  |
| Post# 425665 5/18/2020 at 11:39 (1,439 days old) by Gj9696 (Prosper) | ||
|
I was wondering if anyone knows where I can get quadraflex brush strips for Hoover concept one and two? I have a concept one and two and they desperately need new brush strips. They seen better days. Thank you. | ||
| Post# 425683 , Reply# 1 5/18/2020 at 18:49 (1,438 days old) by Lesinutah (Utah) | ||
eBay | ||
| Post# 425685 , Reply# 2 5/18/2020 at 18:52 (1,438 days old) by Gj9696 (Prosper) | ||
|
www.partswarehouse.com/Ho... | ||
| Post# 425687 , Reply# 3 5/18/2020 at 18:58 (1,438 days old) by Lesinutah (Utah) | ||
|
Hmm | ||
| Post# 425692 , Reply# 4 5/18/2020 at 23:13 (1,438 days old) by Gj9696 (Prosper) | ||
|
I actually saw that one on eBay and looks like it actually goes to convertibles and dial a matics. | ||
| Post# 425706 , Reply# 5 5/19/2020 at 11:33 (1,438 days old) by Gj9696 (Prosper) | ||
|
U know, I took a couple of old worn brush strips that came from a convertible/dial a matic and it fits on the concept agitator bar. Should stay in place once I screw in the end caps. | ||
| Post# 425877 , Reply# 7 5/22/2020 at 18:45 (1,434 days old) by Lesinutah (Utah) | ||
|
Hmm
If it's a brush insert there at be a good solution. Its crossbranding but eureka and Hoover have both used same brush roll different name. The eureka vibra groomer 2 I'm assuming would fit. The Hoover agitator brush roll was produced for a while. Then eureka vibra groomer production started likely as expired paten.
The one just like Hoover is vibra groomer 1. They are not cheap. The vibra groomer 2 you can get for $15. If you want the vibra groomer 1 is dead to rights Hoover agitator brush roll. If you want a good brush roll and economical vg2. The only issue may be using Hoover brush roll end caps on eureka brush roll. I believe Hoover pentagon or hexagon is bigger than eureka's. Les | ||
| Post# 426114 , Reply# 8 5/27/2020 at 14:39 (1,430 days old) by bnsd60m9200 (Akron OH) | ||
 | ||
| Post# 426275 , Reply# 9 5/30/2020 at 15:01 (1,427 days old) by HappyJigg (Los Angeles, California) | ||
|
I am in the same boat, needing new strips for a concept that has worn them down so far they only act as beaters, if that. I have heard that the brush strips for the convertible will work, but the bristles are longer than the concept bristles and rub against the back of the brushroll housing. If only there was a way to trim them easily. | ||
Post# 426302 , Reply# 10 5/30/2020 at 21:40 (1,426 days old) by vacuumlad1650  (Wauponsee, IL) |
||
 | ||
| Post# 426409 , Reply# 11 6/2/2020 at 18:59 (1,423 days old) by 2011hoover700 (owosso michigan) | ||
Hi again these will work for your convertibles too.
I'll try a set on my concepts as these brush strips work great for my convertibles. CLICK HERE TO GO TO 2011hoover700's LINK | ||
| Post# 426416 , Reply# 12 6/2/2020 at 21:27 (1,423 days old) by 2011hoover700 (owosso michigan) | ||
|
| ||
| Post# 426435 , Reply# 13 6/3/2020 at 10:13 (1,423 days old) by Gj9696 (Prosper) | ||
|
2011hoover700, thanks for the link about riccar brush strips. One thing, is it a $1.97 for one strip each? Thanks 👍 | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
