Thread Number: 38834  /  Tag: 50s/60s/70s Vacuum Cleaners
Convertible Headlight Wiring
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items
Post# 412562   8/9/2019 at 20:07 by hooverU4089 (CT)        

Hi all,

If I were to swap the original motor on a 60s model Convertible that has a headlight with a donor motor that is not wired for the light, what is the process of wiring the headlight?

Post# 412624 , Reply# 1   8/12/2019 at 03:16 by MadMan (Chicago, IL, USA)        

madman's profile picture
Are we sure the headlight is even wired into the motor? Is the light bulb used 12v or 120v?

Post# 412629 , Reply# 2   8/12/2019 at 08:33 by hooverU4089 (CT)        

The convertibles of this vintage that featured a headlight had a 25-watt push-and-twist bulb. Not sure of voltage. The motors were definitely all the same on the old models (65, 33, 584, 1020, 719, 593, etc.), just not all had headlights.

Post# 412644 , Reply# 3   8/12/2019 at 21:49 by MadMan (Chicago, IL, USA)        

madman's profile picture
I find it hard to believe it would have that stupid headlight winding in the motor like a Kirby. Especially, like you say, since there were a lot of those models and headlights were optional.

In a worst case scenario, if Hoover was THAT idiotic, you could simply wire the headlight to the 120v power supply for the motor and convert it to a 120v light bulb (they usually use the same socket).

But again, I HIGHLY doubt the motor wiring on a Convertible has anything to do with the light. Kinda surprised no one else has chimed in. At any rate, there's only one way to know for sure: take it apart and look.

Post# 412653 , Reply# 4   8/12/2019 at 23:45 by Lesinutah (Utah)        

lesinutah's profile picture
I don't know if all the posts are in order. Pretty much every vacuum from 1930-1990 and currently sanitairre all use the same bulb. It's basically the same for every vacuum. It's also airstream tail light.

Post# 412871 , Reply# 5   8/17/2019 at 20:34 by hooverU4089 (CT)        

It looks like the wiring is somehow attached to one of the carbon brush housings, but I figured a little knowledge is a dangerous thing.

Post# 412882 , Reply# 6   8/18/2019 at 09:28 by Lesinutah (Utah)        

lesinutah's profile picture
If it's attached to the carbon brush housing it's a ground. There will be two wires from the coil and two wires from the headlight and two wires from the power cord. Each set of wires has black which is power and white which is neutral. The whites all connect and blacks all connect.
If it two speed, headlight 2 wires, coil 4 wires, power cord two wires, carbon brush 2 wires.
Carbon brush one is ground other is power, headlight neutral and power. The coil 1 power 2 neutral and one ground, switch power and neutral.
Green is usual ground, black, red and blue are usually power wires, white and yellow are usually neutral, the neutral may also be any color with a white stripe. The white stripe means neutral.

Forum Index:       Other Forums:                      

Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In

New Members
Click Here To Sign Up.

Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy