|
Thread Number: 13394
Golden J Power Nozzle Question |
[Down to Last] |  |
| Post# 142531 , Reply# 1 7/9/2011 at 18:41 (4,667 days old) by henry200 (Saint Paul MN) | ||
|
The screws not only hold the bottom plate in place but the chrome housing on top too. The bottom plate has tabs which fit into slots near the front bumper. You service the brushroll and belt from the top side though....counter intuitive! | ||
| Post# 142537 , Reply# 3 7/9/2011 at 19:24 (4,667 days old) by henry200 (Saint Paul MN) | ||
|
a picture is worth a thousand words There's a little clip that snaps into place in the spot you circled. Here's what it looks like. 
| ||
| Post# 142541 , Reply# 4 7/9/2011 at 19:44 (4,667 days old) by mercuryman () | ||
|
I Remember: when I first took my PN-2 apart to change the brushroll I had the SAME issue trying to remove the shoe from the bottom of the PN. If you push back on the shoe (toward the wheels) while lifting it up, it should come out easily. | ||
| Post# 142617 , Reply# 5 7/10/2011 at 09:33 (4,666 days old) by Real1 () | ||
|
Ditto..... I too had the same trouble with the PN 2 and at some point it just separated. Great pic of the little clip! I still have to polish the top and put mine back together.;-) Kevin | ||
| Post# 142651 , Reply# 6 7/10/2011 at 15:11 (4,666 days old) by cleaningbuff (Quincy, IL) | ||
 | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
