Thread Number: 12557
New hose for my Model G 		[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 134304   4/27/2011 at 09:09 (4,892 days old) by codyf ()        

Goodmorning! I am wanting to get a new hose for my Electrolux Model G, I use it just about every on the hardwood floors, it is my favorite older vacuum, it is quiet and has good suction which will be better when i get a new hose! ;-) I am looking at the one in the link. I am wondering if I could get a longer hose, like 10' long. I dont need a electric hose, I dont use it on the carpet! Does anyone know were I could order one?

CLICK HERE TO GO TO codyf's LINK
Post# 134315 , Reply# 1   4/27/2011 at 10:45 (4,892 days old) by henry200 (Saint Paul MN)        

A couple of the vac shops near me sell the vinyl generic hose "by the foot."  It's a simple matter to buy the desired length of hose material and reuse the existing metal ends, unless you want to keep the old hose intact for posterity's sake.   I suppose the blank hose could be ordered online as well but I've never looked.
Post# 134316 , Reply# 2   4/27/2011 at 10:54 (4,892 days old) by jfalberti (Visalia, CA)        
How about a 30' hose?

 jfalberti's profile picture

I found this one.  Seems like it would be too long for me.

CLICK HERE TO GO TO jfalberti's LINK on eBay

Post# 134322 , Reply# 3   4/27/2011 at 11:51 (4,891 days old) by henry200 (Saint Paul MN)        

30 feet?  Wow, you could leave the G in the closet and pretend you had a central vac system!
Post# 134330 , Reply# 4   4/27/2011 at 13:06 (4,891 days old) by akabent (LEFT Coast)        
30 feet!

 You could use it in another zip code!
RB

Post# 134331 , Reply# 5   4/27/2011 at 13:07 (4,891 days old) by codyf ()        

@ Joe, thats a little to long for me too! I just need about 10', we have tall celings and when i am cleaning the fans i always have to set the vac on a chair or get Dan to hold it! Thank you tho!

Just cause im curious, what would that much house do to the suction?

Post# 134332 , Reply# 6   4/27/2011 at 13:10 (4,891 days old) by vac-o-matic (Saint Louis, Mo.)        
Check this one..

 The above link you shows a crush proof type hose, I have that one, but also have the one on this link, and I like wire-reinforced type hoses, just a preference. You can order both ends from Hesco I believe, and have a hose made in your desired length at a vac shop, but the one in this link works great, and has the feel and flexibility of an OEM type hose.

CLICK HERE TO GO TO vac-o-matic's LINK on eBay


Post# 134334 , Reply# 7   4/27/2011 at 13:18 (4,891 days old) by jfalberti (Visalia, CA)        
There would

jfalberti's profile picture

probably be some reduction in suction with a 30 foot hose.  I know with my Dyson, the suction seems stronger if I don't extend the hose as compared with when I do stretch it out.
Post# 134335 , Reply# 8   4/27/2011 at 13:23 (4,891 days old) by electrolux~137 ()        

 

 

 

Instead of getting a longer hose, which will impact suction power, why not just get an extra set of wands? The Model G wands are aluminum and very light-weight. You might only need one additional wand to reach into your ceilings. Then for normal cleaning, go back to just the two wands and you'll still have full power.

 

Plus, my experience with extra-long hoses is that they make it harder to maneuver and control the machine. And the longer hose will have a greater tendency to get wrapped around furniture and table legs.

 

 
Post# 134344 , Reply# 9   4/27/2011 at 14:31 (4,891 days old) by codyf ()        

I think that is what i will do! I am needing a new hose anyway and just thought i would maybe get one a little longer, but i can for sure see your point on maneuvering and getting caught on funiture! Thanks!!

Post# 134353 , Reply# 10   4/27/2011 at 16:40 (4,891 days old) by kenkart ()        
I will tell you!

 What I did for a new hose, I took a crushproof genuine Electrolux hose for one of the Discovery uprights, took off the machine end, attached a rubber cuff, and cemented it into a Lux machine end, made a nice light hose that is somewhat genuine Lux.


Forum Index:       Other Forums:                      


Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members Click Here To Sign Up.



                     

automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
 Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals 		Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy