Thread Number: 6238
Thank you HooverCelebrity...... 		[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 69640   5/17/2009 at 21:21 (5,457 days old) by vacuumfreeeke ()        

I mentioned on a previous thread that I haven't been able to find a new power nozzle for my Hoover Celebrity though I've been looking for a couple years and that I really missed the machine. Well, Fred, being the kind person that he is found one on the 'bay and let me know about it. I got it and just wanted to say thanks... if not for you, I probably wouldn't have found it!

I spent a little more than I wanted to on it. I only wanted to spend 20 dollars, but there was another bidder, so I had to pay 36 dollars... with shipping my total is 50 bucks... I think I paid less than half that for the entire machine a few years ago! But... I had just lost a Tri-star AND a Royal Prince hand vac... I probably would have spent 500 dollars just to not get outbid again! It was getting frustrating!

Does anyone know if it's a very difficult operation to transplant the neck from the old power nozzle to the new base? I know the motor housing will be easy, but not sure about the neck. Would it be easier just to have the old power nozzle color matched at Lowes (it's light green) and just paint the new one that color?

Thanks :o)

Post# 69717 , Reply# 1   5/18/2009 at 04:59 (5,457 days old) by kenmore81 (Warwick, RI)        
Nooo...

 kenmore81's profile picture
It isn't hard to transplant the neck, once you undo the screws for the motor I think IIRC one of the motor screws holds the plate that secures the neck. BTW Im sending you an e-mail.

Post# 69720 , Reply# 2   5/18/2009 at 05:35 (5,457 days old) by kenmore81 (Warwick, RI)        
You new one

 kenmore81's profile picture
Matches my Celeb, I wouldnt paint it tho unless you really have to=)
Kenny.

Post# 69726 , Reply# 3   5/18/2009 at 08:22 (5,457 days old) by vacuumfreeeke ()        

Hey Kenny... I'm posting a picture of the old base to show you why I needed a new one. The entire left side where the brushroll goes is cracked and missing.... I don't think it can be used!

Post# 69823 , Reply# 4   5/19/2009 at 04:39 (5,456 days old) by kenmore81 (Warwick, RI)        
Would be difficult

kenmore81's profile picture
However not impossible, The same thing happened to the green one I used to have,I wonder if there was a flaw in the plastic for those years.Have you swapped the neck yet? Also you will need to swap the cord or atleast the holder to match yours wich is a fairly easy task.

Post# 69828 , Reply# 5   5/19/2009 at 08:47 (5,456 days old) by vacuumfreeeke ()        

I haven't gotten the new one yet... I don't know where it's coming from! I was noticing the cord holder thing too! So... after seeing the pic, and knowing what's wrong with it, do you still want the old one? I'll send it if you think you can use it... otherwise, in the trash it goes. That seems to be a common problem with the Celebrity power nozzles (though I know they used this power nozzle for other machines and other power nozzles for Celebrity machines so I should say specifically these power nozzles)... also, the metal retaing nub on the power nozzle and the bare floor tool (mine came with the barefloor tool which I love and the crevice tool only) broke off and I had an ex of mine fashion a replacement out of a length of screw. When I got it, the power nozzle was duct taped to the wand by the previous owner... AND the cord winder didn't work! I miss that ex.... he was a jerk but could fix anything LOL...

I guess though powerful and attractive, these weren't very durable machines huh?

Post# 69832 , Reply# 6   5/19/2009 at 09:09 (5,456 days old) by kenmore81 (Warwick, RI)        
Actually

 kenmore81's profile picture
As for the power nozzles the same thing happens to some of hoovers L shaped ones,just not as often I think ive super glued 2 that were broke on that same side out the hundred ive seen.By all means plese don't trash it. I can probly make in work untill I can find one. I havn't really bid on any because I always ght outbid and funds are still tough for me these days.Ill send the $ through pay pal or get you a money order if you prefer.
Kenny

Post# 69833 , Reply# 7   5/19/2009 at 09:13 (5,456 days old) by kenmore81 (Warwick, RI)        

kenmore81's profile picture
I forgot to mention, as far as duability the PN and the cord winders and cor clips on the non rewind models seems to be the only issue I have found so far.

Post# 69835 , Reply# 8   5/19/2009 at 11:51 (5,456 days old) by vacuumfreeeke ()        

Hey Kenny.... I hope you weren't bidding on the one that I won and I outbid you! It is sooooo frustrating to get outbid... sometimes the price of things goes way beyond what's reasonable... I've learned just to let it go and there will always be another that comes along. I know you offered to pay 15 dollars plus shipping, but don't worry about the 15 dollars.... I'd feel silly taking money for something that I was going to throw in the trash anyway. Besides, we're all friends here anyway... our common unique passion unites us, we should be able to help each other out from time to time... just pay shipping! I wish I still had the piece that broke off, then maybe you could JB Weld it or something, but I can't find it anywhere....

Post# 69872 , Reply# 9   5/20/2009 at 02:17 (5,455 days old) by kenmore81 (Warwick, RI)        
No No

kenmore81's profile picture
I didnt bid on yours I had seen it but I didnt bother. I appreciate you sending me the broken one.I have a plan lol.Im going to try a thin piece of wood if not a friend can maybe cut it out of metal. Well see what happens with the wood first.I think i have the pefect piece.
Ken


Forum Index:       Other Forums:                      


Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members Click Here To Sign Up.



                     

automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
 Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals 		Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy