Thread Number: 29126
/ Tag: 50s/60s/70s Vacuum Cleaners
Kirby Dual Sanitronic 80 Thrift Shop Find |
[Down to Last] |
Post# 325466   5/22/2015 at 16:44 (3,262 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
I found this today going around to a few thrift shops, it's a little dirty but it runs very nicely! Unfortunately the original bag is gone but those are to hard to find. The brushroll is a pretty worn too. I might be offering this one up for sale or trade, i like to think I "rescued" it lol. It could look very nice with the right bag and all buffed out!
|
Post# 325469 , Reply# 1   5/22/2015 at 17:03 (3,261 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
All original!
~Ben
View Full Size
|
Post# 325470 , Reply# 2   5/22/2015 at 19:02 (3,261 days old) by BikerRay (Middle Earth)   |   | |
Checkrate/Likes
 
     
The Green Bags for the D80 are still available from Kirby Part # 190067
The brush roll is also still available from Kirby Part # 1525 If it needs a belt that's Part # 159056G for a three pack It looks like it might be missing the lower cord hook if it is, that's Part # 173867S The nice thing is the upper and lower cord hooks are the same. I currently have two of them, one cost me $12 the other was given to me by a local Kirby Dealer.
View Full Size
|
Post# 325484 , Reply# 3   5/23/2015 at 01:15 (3,261 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 325487 , Reply# 4   5/23/2015 at 02:14 (3,261 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
2    
|
Post# 325489 , Reply# 5   5/23/2015 at 07:48 (3,261 days old) by BikerRay (Middle Earth)   |   | |
Checkrate/Likes
 
     
|
Post# 325514 , Reply# 6   5/23/2015 at 17:00 (3,260 days old) by Miskini (Northville, Michigan )   |   | |
Checkrate/Likes
 
1    
|
Post# 325515 , Reply# 7   5/23/2015 at 17:14 (3,260 days old) by suckolux (Yuba City, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 325522 , Reply# 8   5/23/2015 at 18:44 (3,260 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
I'm really leaning towards keeping this one after seeing how nice it looks cleaned up. It really could use a new headlight trim piece (as long as it's green) yes I love the green lol. Aside from that, it really just needs a new brushroll & green bag w/ the original rubber bag topper that says "Dual Sanitronic 80". After these things have been done and I work a bit more on buffing, it'll be good as new! I could also go for some attachments lol
|
Post# 325523 , Reply# 9   5/23/2015 at 18:46 (3,260 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 325538 , Reply# 10   5/24/2015 at 08:54 (3,260 days old) by BikerRay (Middle Earth)   |   | |
Checkrate/Likes
 
1    
|
Post# 325639 , Reply# 11   5/24/2015 at 23:32 (3,259 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
Yes I've found that out about the bag topper. And as an update, I've found all the pieces I need on eBay (brushroll, headlight trim, solid plastic handle top, and original bag). I hope to get these and do some heavy buffing to get it as good as new. I'll probably take it to the local vac shop to have it serviced too just for good measure.
|
Post# 325681 , Reply# 12   5/25/2015 at 13:04 (3,259 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
1    
|
Post# 325711 , Reply# 13   5/25/2015 at 15:05 (3,259 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 325712 , Reply# 14   5/25/2015 at 15:06 (3,259 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 325713 , Reply# 15   5/25/2015 at 15:08 (3,259 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 325714 , Reply# 16   5/25/2015 at 15:16 (3,259 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 325716 , Reply# 17   5/25/2015 at 15:17 (3,259 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 325720 , Reply# 18   5/25/2015 at 15:35 (3,259 days old) by Marks_here (_._)   |   | |
Checkrate/Likes
 
1    
|
Post# 325740 , Reply# 19   5/25/2015 at 17:15 (3,258 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 325762 , Reply# 20   5/26/2015 at 00:45 (3,258 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 325764 , Reply# 21   5/26/2015 at 01:23 (3,258 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
It is the original one. Here's my 1977 Classic III proudly wearing it (the picture was taken by my paternal grandparents back in 1990--the vac was mine eight years later).
Meanwhile, here is also a picture of my mom's 1978 Classic III, with the updated bag cloth (and handle fork assembly). ~Ben |
Post# 325812 , Reply# 22   5/26/2015 at 18:04 (3,257 days old) by Vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
1    
|
Post# 326521 , Reply# 23   6/6/2015 at 22:40 (3,246 days old) by vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
1    
|
Post# 326580 , Reply# 24   6/8/2015 at 00:41 (3,245 days old) by vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 326588 , Reply# 25   6/8/2015 at 08:35 (3,245 days old) by BikerRay (Middle Earth)   |   | |
Checkrate/Likes
 
1    
|
Post# 326602 , Reply# 26   6/8/2015 at 12:55 (3,245 days old) by sptyks (Skowhegan, Maine)   |   | |
Checkrate/Likes
 
     
|
Post# 326697 , Reply# 27   6/10/2015 at 21:09 (3,242 days old) by Kirbyguy234 ()   |   | |
Checkrate/Likes
 
     
Love the vaccum you got there keep up the good work on it:) |
Post# 327493 , Reply# 28   6/21/2015 at 03:28 (3,232 days old) by Hooverboy81 (Myrtle Place)   |   | |
Checkrate/Likes
 
     
|
Post# 327655 , Reply# 29   6/21/2015 at 15:52 (3,232 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)   |   | |
Checkrate/Likes
 
2    
|
Post# 327673 , Reply# 30   6/21/2015 at 18:06 (3,231 days old) by vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
1    
|
Post# 327738 , Reply# 31   6/22/2015 at 12:36 (3,231 days old) by Hooverboy81 (Myrtle Place)   |   | |
Checkrate/Likes
 
2    
|
Post# 327754 , Reply# 32   6/22/2015 at 15:15 (3,231 days old) by vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
1    
|
Post# 336198 , Reply# 33   10/25/2015 at 20:47 (3,105 days old) by vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 336200 , Reply# 34   10/25/2015 at 21:17 (3,105 days old) by suckolux (Yuba City, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 336213 , Reply# 35   10/25/2015 at 23:08 (3,105 days old) by super-sweeper (KSSRC Refurbishment Center)   |   | |
Checkrate/Likes
 
     
|
Post# 336233 , Reply# 36   10/26/2015 at 14:14 (3,105 days old) by sanitaire (anchorage, alaska)   |   | |
Checkrate/Likes
 
     
nice job. I like too use mothers brand mag and aluminum polish. most of my kirby's I gotten were near lots of moisture....so the metal takes a bit more work too polish. |
Post# 336443 , Reply# 37   10/28/2015 at 23:21 (3,102 days old) by vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 336450 , Reply# 38   10/29/2015 at 01:01 (3,102 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 336751 , Reply# 39   11/2/2015 at 01:16 (3,098 days old) by vintagevaclover (Athens, GA)   |   | |
Checkrate/Likes
 
     
|