Thread Number: 22359
Kirby Belt and Brush Roll Question |
[Down to Last] |
Post# 250601   9/18/2013 at 23:34 (3,872 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
May I ask: does anyone know of any outstanding consequences (i.e. possible motor damage) that could result if I were to use a Reno Group belt with the upright brush roll?
For example: to mate the 301289 belt with the 152575 or 152584 brush rolls. Normally, Kirby recommends using these belts and brush rolls by machines: BELTS (UPRIGHT) 159056 - models 505 to Tradition 301291 - models Heritage to Sentria II BRUSH ROLLS (UPRIGHT) 1482S - models 505 to 512 1525 - models 513 to Dual Sanitronic 80 152575 - models Classic to Tradition 152584 - models Heritage to Legend II 156294 - models Generation 3 and G4 (standard) 159394 - models Generation 3 and G4 (delicate) 156193 - models Generation 3 and G4 (pet owners) 152502 - models G5 to Sentria II (standard bristle) 152505 - models G5 to Sentria II (stiff bristle) 156198 - models G5 to Sentria II (pet owners) Thank you, Ben |
Post# 250759 , Reply# 1   9/20/2013 at 17:44 (3,870 days old) by Jeschbac (Texas)   |   | |
Checkrate/Likes
 
     
Does anyone know what belt 9527 is for? Someone sold me this for a 516 and it practically snaps the belt lifter off. Much too tight! |
Post# 250766 , Reply# 2   9/20/2013 at 19:27 (3,870 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|