|
Thread Number: 19299
Getting Scratches out of Metal Parts |
[Down to Last] |  |
| Post# 213539 1/10/2013 at 20:11 (4,123 days old) by mieles7 (TX) | ||
 | ||
| Post# 213546 , Reply# 1 1/10/2013 at 20:53 (4,123 days old) by kirbykid (Horseheads,New York 14845) | ||
|
wetsanding | ||
| Post# 213572 , Reply# 2 1/10/2013 at 22:37 (4,122 days old) by bnsd60m9200 (Akron OH) | ||
 | ||
| Post# 213575 , Reply# 3 1/10/2013 at 22:40 (4,122 days old) by bnsd60m9200 (Akron OH) | ||
|
| ||
| Post# 213592 , Reply# 4 1/11/2013 at 02:43 (4,122 days old) by mikeKLondon () | ||
|
Polishing The only way to really do this is with a bench polisher and a let of practice and care they are hard to use | ||
| Post# 213635 , Reply# 5 1/11/2013 at 12:43 (4,122 days old) by mieles7 (TX) | ||
|
| ||
| Post# 213661 , Reply# 6 1/11/2013 at 17:14 (4,122 days old) by KC_Kirby (Kansas City, MO) | ||
|
You can either do what Will says and use a regular sander or you can use the bench grinder with a different wheel/compound. I use a sisal wheel with an emery compound. The sisal wheel is a rougher buffing wheel and the emery is a harsher compound. It works pretty well for me. Chad | ||
| Post# 213663 , Reply# 7 1/11/2013 at 17:22 (4,122 days old) by caligula (Wallingford, Connecticut) | ||
Yes, but, | ||
| Post# 213808 , Reply# 8 1/12/2013 at 20:46 (4,121 days old) by mieles7 (TX) | ||
|
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
