Thread Number: 18324
Kirby Comvac CV2000, CV2400 and CV2800 |
[Down to Last] |
Post# 201335   9/20/2012 at 20:14 (4,235 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
Have you guys ever heard or seen any of the extra-heavy-duty Kirby COMVAC vacuum cleaners, models CV2000, CV2400 and CV2800? Like all commercial-duty Kirby products (Janitronic, SuperSweep, and American Lincoln SuperVac), these three will be as rare as hen's teeth; like looking for a needle in a haystack.
These three COMVACs are wide-area in that they have respective nozzle widths of 20", 24" and 28". All three use 10-amp motors with varying RPMs: the 20" model turns 5400 RPM, and the other two have progressively lower brush speeds of 5200 (for the 24" model) and 5000 RPM (28") respectively, whereas both of their household-derived CVD series uprights turn 12,000 RPM regardless of amperage (5 amps on CVD1300, and 6 amps on CVD1600). ~Ben |
Post# 201355 , Reply# 1   9/20/2012 at 23:34 (4,235 days old) by kirbyvertibles (Independence, KS)   |   | |
Checkrate/Likes
 
     
|
Post# 201365 , Reply# 2   9/21/2012 at 00:53 (4,235 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 201366 , Reply# 3   9/21/2012 at 00:54 (4,235 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 201390 , Reply# 5   9/21/2012 at 07:44 (4,235 days old) by kirbymodel2c (Nottingham, England)   |   | |
Checkrate/Likes
 
1    
|
Post# 201428 , Reply# 6   9/22/2012 at 01:54 (4,234 days old) by tolivac (Greenville,NC)   |   | |
Checkrate/Likes
 
     
I use mine to vacuum part of my place-the main hall-just run it up and down the hall-DONE. |