|
Thread Number: 1560
Hoover one touch. |
[Down to Last] |  |
| Post# 16019 7/5/2007 at 07:47 (6,139 days old) by kirbymodel2c (Nottingham, England) | ||
Hi Iv been givern a hoover one touch. It works but it switchs its self off after 2 mins the turns on again etc. Once you take the cyclonic chamber is off it stays on longer before switchin its self off again. Iv checked for blockages and there was 1 but Iv moved it but it still does it. Any ideas??? I think t may be a termo thingy that stops it over heating if it is any ideas how to fix it? Thanks james | ||
| Post# 16133 , Reply# 1 7/8/2007 at 06:00 (6,136 days old) by rob_89 () | ||
|
Filters Hi James, Did you remove the post motor filter at all? I know they can clog quite badly, if its still in place it might be restricting the air movement and making the motor run too hot. Hope that possibly helps! Rob | ||
| Post# 16265 , Reply# 2 7/12/2007 at 15:43 (6,132 days old) by kirbymodel2c (Nottingham, England) | ||
|
Thanks for your help! | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
