Thread Number: 46091
/ Tag: 50s/60s/70s Vacuum Cleaners
eurka dial a nap resto done |
[Down to Last] | ![]() |
Post# 475517   2/12/2025 at 13:34 by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
![]() 1    
![]()
now here is my DIAL ANAP with its new bag installed works like a charm love it if it doesnt sell its a keeper. New paint , belt , outer bag permanent,inner bag new and spring to hold it . Work like brand new motor is quiet pull it self along the rug or carpet heigh adjustment works she was rusty before now shes new again
View Full Size
|
Post# 475518 , Reply# 1   2/12/2025 at 13:35 by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
![]() 1    
![]()
Here a progress of her in the shop new bag ect
first pic is today all done second pic is with old bag after paint third pic is when i got her rusty dusty dirty |
Post# 475547 , Reply# 2   2/13/2025 at 19:23 by Lesinutah (Utah)   |   | |
Checkrate/Likes
![]() 1    
![]() |
Post# 475568 , Reply# 3   2/14/2025 at 11:50 by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
![]() 1    
![]() |
Post# 475593 , Reply# 4   2/16/2025 at 10:35 by eurekaprince (Montreal, Canada)   |   | |
Checkrate/Likes
![]()      
![]()
Felicitations Antoine! Was this Eureka made in Canada at Kitchener’s Onward Manufacturing factory?
To install the F&G bag, it’s always easier to do it with the handle release in the lowest (flat to the ground) position and the entire vacuum turned over with the bag facing up and bottom of the motor housing also facing up. Be careful to install the bag correctly: the throat of the bag is always closest to the handle and the collector part if the bag is closest to the zipper. |
Post# 475594 , Reply# 5   2/16/2025 at 11:09 by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
![]()      
![]() |
Post# 475596 , Reply# 6   2/16/2025 at 14:27 by eurekaprince (Montreal, Canada)   |   | |
Checkrate/Likes
![]() 1    
![]()
Okay…that’s great! Another recommendation: always lower the vacuum’s handle first before turning on the vacuum, and turn it off before bringing the handle back to the storage position. This reduces stress on the bag when the motor is on and prevents any dirt from staying in the “neck” of the bag.
Enjoy your new toy!!! |
Post# 475599 , Reply# 7   2/16/2025 at 17:50 by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
![]()      
![]() |