|
Thread Number: 46039
/ Tag: 50s/60s/70s Vacuum Cleaners
classic III bag install |
[Down to Last] |  |
| Post# 475172 1/17/2025 at 22:25 by vacuser (milford,ohio) | ||
 | ||
| Post# 475178 , Reply# 1 1/18/2025 at 14:11 by kirbyman65 (USA) | ||
i usally | ||
| Post# 475180 , Reply# 2 1/18/2025 at 20:11 by Human (Pines of Carolina) | ||
I think all Classic IIIs had shake-out bags. My understanding is the first Kirby model to have a filter bag option was the Tradition
That said, I had a similar challenge with a Heritage '84. The bag was filthy when I got it, so I took it off the Emtor and laundered it. I spent about three hours trying to wrestle it back onto the bag, but finally gave up and substituted a plastic mini-emtor from a Heritage II, which took about 15 seconds to install. Now knowing the inside-out technique, I may have to give it another try. I'd like to have the original emtor/fill tube assembly in place so I can use up a small supply of Style 2 bags I have on hand. | ||
| Post# 475181 , Reply# 3 1/18/2025 at 21:53 by kirbyman65 (USA) | ||
|
Human | ||
| Post# 475183 , Reply# 4 1/18/2025 at 22:30 by vacuser (milford,ohio) | ||
|
classic III shakeout bag install | ||
| Post# 475218 , Reply# 5 1/20/2025 at 17:30 by Human (Pines of Carolina) | ||
|
Easy-peasy | ||
| Post# 475343 , Reply# 6 1/29/2025 at 18:02 by texaskirbyguy (Plano, TX) | ||
|
ROLL the spring on with your fingers - do not try to pry it on. Works great. | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
