|
Thread Number: 45023
/ Tag: 80s/90s Vacuum Cleaners
Rainbow D4 Power Nozzle question |
[Down to Last] |  |
Post# 466987 10/22/2023 at 22:06 by kloveland  (Tulsa) |
||
I happened to find another D4 SE today for cheap. It has the PN 1 rectangular shaped nozzle. When I removed the brush roll three washers fell out. Are there supposed to be two or one washer(s) on each side? I checked my other rainbow PN and it only had one washer on each side.
This is the rectangular shaped PN with sleeve bearings and rubber inserts that fit onto the outsides of the bearing. | ||
|
Post# 467012 , Reply# 1 10/23/2023 at 17:25 by Kloveland (Tulsa) |
||
|
Ready for a multiple choice test?
Is it?
A. Two washers on the pulley end and one on the right side.
View Full Size
| ||
|
Post# 467013 , Reply# 2 10/23/2023 at 17:27 by Kloveland (Tulsa) |
||
|
B. One washer on the pulley end and two on the right.
View Full Size
| ||
|
Post# 467014 , Reply# 3 10/23/2023 at 17:28 by Kloveland (Tulsa) |
||
|
C. One washer on each end.
View Full Size
| ||
|
Post# 467015 , Reply# 4 10/23/2023 at 17:29 by Kloveland (Tulsa) |
||
|
D. Two washers on both ends.
View Full Size
| ||
|
Post# 467016 , Reply# 5 10/23/2023 at 17:31 by Kloveland (Tulsa) |
||
|
E. No washers on either end.
View Full Size
| ||
|
Post# 467018 , Reply# 6 10/23/2023 at 20:52 by Maytag142C (Somewhere over the rainbow. ) |
||
 | ||
|
Post# 467020 , Reply# 7 10/24/2023 at 07:40 by Kloveland (Tulsa) |
||
|
| ||
|
Post# 467042 , Reply# 8 10/24/2023 at 23:15 by Maytag142C (Somewhere over the rainbow. ) |
||
|
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
