|
Thread Number: 44443
/ Tag: Pre-1950 Vacuum Cleaners
Hoover model 28 issue |
[Down to Last] |  |
| Post# 462450 4/20/2023 at 21:01 (370 days old) by VacsofProsper (TX) | ||
Earlier today I got a chance to switch out handles from my hoover 28 because the original one was damaged so I had to remove the cord and wiring from the power switch and after putting everything back together, the vacuum didn't turn on so I switched the wires a bit and luckily I took it to the garage and plugged it in and a spark and a pop occurred on the switch and left a little smell too. So I was wondering if the wires need to be fixed or try to look for a replacement switch or something. I'll post a picture in a bit.
| ||
| Post# 462453 , Reply# 1 4/20/2023 at 22:24 (370 days old) by VacsofProsper (TX) | ||
|
| ||
| Post# 462463 , Reply# 2 4/21/2023 at 07:22 (369 days old) by bikerray (Middle Earth) | ||
 | ||
| Post# 462470 , Reply# 3 4/21/2023 at 12:21 (369 days old) by VacsofProsper (TX) | ||
|
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}