Thread Number: 42853
/ Tag: 50s/60s/70s Vacuum Cleaners
Filter upgrade tristar compact ? |
[Down to Last] |
Post# 448969   12/31/2021 at 12:46 (840 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
Is this a good upgrade for my trustar compact i have foam filter but they get cover quick in fine dust i find maybe this would make em breath good any opinion ty my filter is from mc hardy vac ty . CLICK HERE TO GO TO Thevacomaticiec's LINK on eBay |
Post# 448978 , Reply# 1   12/31/2021 at 16:36 (840 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
|
Post# 448981 , Reply# 2   12/31/2021 at 16:43 (840 days old) by Vinvac (Dubuque IA)   |   | |
Checkrate/Likes
 
1    
|
Post# 448982 , Reply# 3   12/31/2021 at 16:44 (840 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
|
Post# 448987 , Reply# 5   1/1/2022 at 02:16 (840 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
|
Post# 449069 , Reply# 6   1/4/2022 at 18:34 (836 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
|
Post# 449392 , Reply# 7   1/20/2022 at 14:07 (820 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
woooow whata diffrence the pleated hepa 99,9% 0.03 micron filter did on m Compact C8 and Tristar CXL !!!
most of the effect notice on my C8 wooow motor sounds strong TON of air flow floor tool sticks to the floor yesssss got her power back !!!! yippie and yes foam filter does lest dust thru on motor case and fans i notice a film . Also new paper bag , cloth bag , hepa motor filter she is pulling so much air and suction i can feel it in the hose again .Good filtriation will give a motor the best chance to last a long time ,Dust in motor aka sand blast bearing then bye bye motor.
View Full Size
This post was last edited 01/20/2022 at 14:24 |
Post# 449395 , Reply# 8   1/20/2022 at 18:20 (820 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
|
Post# 449471 , Reply# 9   1/22/2022 at 21:10 (818 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
My youtube to see my vac is same name as here Thevacomaticiec . How would i go about bearing grease and or lube my c8 pulls alot of suction but on shut down rumbles.
This post was last edited 01/22/2022 at 23:28 |
Post# 449854 , Reply# 10   2/3/2022 at 18:49 (806 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
Manage to open my Compact c9 motor amature remove going to clean it replace carbon brush ,
and grease bottom bearing is tehre a way to fully open fan case???? Id like to clean it well beforei put her back together the motor of C8 rumbles and vibrates id like take top c8 for bottom c9 if you get my point ty . |
Post# 449857 , Reply# 11   2/3/2022 at 20:47 (806 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
|
Post# 449859 , Reply# 13   2/3/2022 at 21:01 (806 days old) by Thevacomaticiec (Bathurst New Brunswick Canada )   |   | |
Checkrate/Likes
 
     
|