Thread Number: 42832
/ Tag: 80s/90s Vacuum Cleaners
Kirby Heritage thru Legend II - Headlight Cap for 13" Nozzle |
[Down to Last] |
Post# 448825   12/25/2021 at 21:18 (844 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
For those of you familiar with the Kirby Heritage 1HD through Legend II, those produced with the 13" nozzle, Kirby had actually made a modification to the standard headlight cap casting on these units (which will have the suffix "-13" in their model nomenclatures), so that the cap will better fit flush with the upward slope angle of the top of the 13" nozzle casting.
This modified headlight cap was only ever used on these specially-built machines (again, with the suffix "-13" in the model nomenclature), not on those with the standard 16" nozzle. If Kirby ever thought to make the 13" nozzle an option for the Classic III 2CB and Tradition 3CB, they would have done the same thing to the headlight cap of these two respective machines (especially with regard to the first batch of Traditions made with the top-mounted speed switch placed inside the light cap) for these special orders. ~Ben This post was last edited 12/25/2021 at 22:42 |
Post# 448834 , Reply# 1   12/25/2021 at 23:17 (844 days old) by KirbyCollector (Columbus Ohio USA)   |   | |
Checkrate/Likes
 
1    
Here is a side by side comparison I made of my normal Heritage II and special Legend.
|
Post# 448835 , Reply# 2   12/26/2021 at 01:04 (844 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|