Thread Number: 42697
/ Tag: Member Selling Item(s)/Non Professionally
back room vacs-You restore or use parts or I scrap |
[Down to Last] |
Post# 448034 , Reply# 1   11/19/2021 at 15:01 (860 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
1    
|
Post# 448088 , Reply# 3   11/22/2021 at 17:28 (856 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
--blue concept & green bagged Windtunnel with turbo brush in storage compartment came in and now need to GO OUT.Anyone want these.I do not! |
Post# 448514 , Reply# 4   12/9/2021 at 01:14 (840 days old) by texbodemer (Mountlake Terrace)   |   | |
Checkrate/Likes
 
     
|
Post# 448690 , Reply# 8   12/17/2021 at 19:59 (831 days old) by Elecroluxmodel1 ( Schererville, Indiana)   |   | |
Checkrate/Likes
 
     
|
Post# 448691 , Reply# 9   12/18/2021 at 08:16 (831 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
Most at old shop are Convertible but still have MANY Hoover uprights from 20s-40s from very good to use for parts.May have time to look this weekend. |
Post# 451479 , Reply# 13   4/11/2022 at 18:27 (716 days old) by repairman (Woodridge, IL)   |   | |
Checkrate/Likes
 
     
Do you have any: Kirby F&G Conversion Bags Kirby F&G Couplers Aftermarket Kirby Trim Kits (Preferrably red or blue) |
Post# 451480 , Reply# 14   4/11/2022 at 18:33 (716 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
bag-don't think so coupler-possible red one trim-might be red,blue,tan These would be at old shop 1 block away.Hoping to sort through much of that soon. |
Post# 451485 , Reply# 16   4/11/2022 at 22:19 (716 days old) by Collector2 (Moose Jaw, Sk)   |   | |
Checkrate/Likes
 
     
Hey Jimmy
We spoke on the phone several years ago. Did you ever find the Bronze CB that matched the Bronze model G (Like this one or with the stainless tank?)
View Full Size
|
Post# 451542 , Reply# 20   4/12/2022 at 23:59 (715 days old) by Dmc02766 (Meridian, Mississippi)   |   | |
Checkrate/Likes
 
     
Hi Jimmy, I would be interested in buying one of the CB's in good condition. I've been hunting for one for a while. You wouldnt happen to have any LXI's would you? I have been hunting for one of those as well. |
Post# 451546 , Reply# 21   4/13/2022 at 02:33 (715 days old) by panasonicvac (Northern Utah)   |   | |
Checkrate/Likes
 
     
|
Post# 451573 , Reply# 24   4/13/2022 at 20:43 (714 days old) by Collector2 (Moose Jaw, Sk)   |   | |
Checkrate/Likes
 
     
Hey Jimmy - would the XX have the handle assembly complete on it. Mine (pictured below) isnt correct. Maybe I could make one of two.
View Full Size
|
Post# 451625 , Reply# 26   4/14/2022 at 21:36 (713 days old) by Kirbytex85 (Houston, TX)   |   | |
Checkrate/Likes
 
     
|
Post# 451782 , Reply# 29   4/19/2022 at 11:59 (709 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
There should be an extra moth crystal tin.They seem to be the most common.Other tins had liquids with screw cap.There was a glass jar for shampoo and later a spray can for window cleaner.Still no final count on CBs but brown will be the nicest. Jimmy 423-268-4841 |
Post# 451793 , Reply# 30   4/19/2022 at 22:07 (708 days old) by Kirbytex85 (Houston, TX)   |   | |
Checkrate/Likes
 
     
|
Post# 451800 , Reply# 31   4/20/2022 at 08:27 (708 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
Hope to have more pics soon.These are in different area.By newer I don't mean newest.None have the direct connect wands. Jimmy 423-268-4841 |
Post# 452004 , Reply# 32   4/25/2022 at 08:31 (703 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
I spent part of the weekend upstairs at old shop.Found 1 & 1/2 brown CB hose & 1 gray hose for earlier CBs as well as box for CB2000.More Filter Queens hiding in corners & MUCH MORE Kirby stuff. |
Post# 452017 , Reply# 33   4/25/2022 at 18:23 (702 days old) by panasonicvac (Northern Utah)   |   | |
Checkrate/Likes
 
     
|
Post# 452036 , Reply# 35   4/26/2022 at 10:59 (702 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)   |   | |
Checkrate/Likes
 
     
|
Post# 452047 , Reply# 37   4/26/2022 at 14:47 (702 days old) by dmc02766 (Meridian, Mississippi)   |   | |
Checkrate/Likes
 
     
Hey Jimmy- Ill give you a call towards the end of the week to talk about some of the Electrolux machines. I'm interested in the CB's, LX, LXI's as you come across them. Maybe we can work out something where I can just buy a pallet of them shipped if thats something you are interested in doing. |
Post# 452158 , Reply# 38   4/29/2022 at 05:11 (699 days old) by huskyvacs (Gnaw Bone, Indiana)   |   | |
Checkrate/Likes
 
     
He won't ship, he expects people to rent a truck and make the drive down there. I asked him 3 yrs. ago about a few attachments and that's what he told me. I live 630 miles away - thats about 3 or 4 day's drive and UHAUL would charge about $1,700 for that much mileage. It's not at all feesable or practical unless you live within his state.
Many collectors sell their vacs & parts on eBay and make serious bank. The one collector I have been following cleared over $900 in just 2 weeks selling old vacs that have not even been restored, $30-$50 for shipping, and people have snatched them up like crazy. He sold virtually every vacuum he put up. 1930's hamilton beach with no handle, no cord, no bag, went for $40 alone. Some Kenmores from just 10 years ago grabbed $60 a pop. |
Post# 452162 , Reply# 39   4/29/2022 at 07:44 (699 days old) by maytag142c (Somewhere over the rainbow. )   |   | |
Checkrate/Likes
 
1    
3 or 4 days drive? Do you drive 25mph? That would be like a 6-7 hour drive and it would be your choice to rent a uhaul. A car/SUV would do it for most as a uhaul would seem a bit excessive.
I understand why he doesn’t ship, if he’s giving stuff away for free or for small dollar amounts, and/or only charging shipping there’s the cost of the time for packing and fuel from going to where his stuff is located to the post office. Time = money to any business owner |
Post# 452317 , Reply# 41   5/5/2022 at 08:14 (693 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
--just made 2 older,rarer vacs go to KY as you will see in the vintage forum.Can we make some go to your state?? |
Post# 452332 , Reply# 42   5/5/2022 at 11:03 (693 days old) by VacsofProsper (TX)   |   | |
Checkrate/Likes
 
     
|
Post# 452422 , Reply# 44   5/8/2022 at 12:02 (690 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
1    
|
Post# 452449 , Reply# 45   5/8/2022 at 23:41 (689 days old) by panasonicvac (Northern Utah)   |   | |
Checkrate/Likes
 
     
|
Post# 452456 , Reply# 46   5/9/2022 at 01:48 (689 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)   |   | |
Checkrate/Likes
 
     
|
Post# 452855 , Reply# 48   5/21/2022 at 11:29 (677 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
--is sold and gone. |
Post# 452899 , Reply# 49   5/22/2022 at 21:25 (675 days old) by jmathes1991 (Bourbonnais IL)   |   | |
Checkrate/Likes
 
     
Still have those Bisons forsale? |
Post# 452911 , Reply# 50   5/23/2022 at 09:27 (675 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
Should be hiding behind LOTS of Hoover Convertibles.Will have to find ladder,move ladder and climb ladder.Probably have original,genuine Bison floor wax. Jimmy 423-268-4841 |
Post# 452945 , Reply# 51   5/24/2022 at 08:05 (674 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
-just made the first of a few vacs(this one an Electrolux)go to the west coast.Can we make one go to you? |
Post# 453610 , Reply# 52   6/9/2022 at 18:03 (657 days old) by Rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
1    
|
Post# 453624 , Reply# 53   6/9/2022 at 21:35 (657 days old) by Repairman (Woodridge, IL)   |   | |
Checkrate/Likes
 
     
Do you have any Hoover Convertible Outer bags new or used with or without fill tube? |
Post# 453635 , Reply# 54   6/10/2022 at 07:55 (657 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
Yes!Many.Also have convertible hoses. Do I have time to find and sort and run a book store full time?Very little.But will try to find at least 1 box full Sunday. |
Post# 453648 , Reply# 55   6/10/2022 at 12:12 (657 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
1    
|
Post# 453655 , Reply# 56   6/10/2022 at 13:38 (657 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
1    
|
Post# 453657 , Reply# 57   6/10/2022 at 14:45 (657 days old) by repairman (Woodridge, IL)   |   | |
Checkrate/Likes
 
     
How much for all those bags in the 3 pictures? Do you have any Kirby outer bags? |
Post# 453683 , Reply# 58   6/10/2022 at 23:51 (656 days old) by repairman (Woodridge, IL)   |   | |
Checkrate/Likes
 
     
Any Concept/Dial A Matic brushrolls? |
Post# 453823 , Reply# 60   6/14/2022 at 23:39 (652 days old) by Kirbytex85 (Houston, TX)   |   | |
Checkrate/Likes
 
     
|
Post# 454832 , Reply# 61   7/14/2022 at 05:54 (623 days old) by 2011hoover700 (owosso michigan)   |   | |
Checkrate/Likes
 
     
Hi Jimmy I'm wondering if you still happen to have the hoover 63 outer bag assembly in thepictureIcircled?
Also I could use a 63 blower port as well. Thank you.
View Full Size
|
Post# 454861 , Reply# 63   7/14/2022 at 17:20 (622 days old) by huskyvacs (Gnaw Bone, Indiana)   |   | |
Checkrate/Likes
 
     
|
Post# 454888 , Reply# 65   7/15/2022 at 10:40 (622 days old) by Hoover300 (Kentucky)   |   | |
Checkrate/Likes
 
     
|
Post# 454945 , Reply# 66   7/17/2022 at 14:18 (620 days old) by Clothbag (West Springfield, Ma.)   |   | |
Checkrate/Likes
 
     
I'm looking for a light blue handle grip for my Royal 880. I've been searching online and at local stores, but no luck as yet. |
Post# 454949 , Reply# 67   7/17/2022 at 16:08 (620 days old) by Hoover300 (Kentucky)   |   | |
Checkrate/Likes
 
     
|