Thread Number: 42439
/ Tag: Wanted to Buy Items
Rear tube part for GE/Eureka bagged upright |
[Down to Last] |
Post# 446220 , Reply# 1   9/19/2021 at 11:09 (947 days old) by Hoover300 (Kentucky)   |   | |
Checkrate/Likes
 
     
|
Post# 446224 , Reply# 2   9/19/2021 at 11:20 (947 days old) by Gj9696 (Prosper)   |   | |
Checkrate/Likes
 
     
Hi Damien. I already checked vacspartswarehouse before, sadly they don't have it anymore. I also asked an ebay seller who's selling a few parts from this vacuum, the seller sold that part a while ago. |
Post# 446243 , Reply# 3   9/19/2021 at 17:19 (947 days old) by Hoover300 (Kentucky)   |   | |
Checkrate/Likes
 
     
|
Post# 446244 , Reply# 4   9/19/2021 at 17:22 (947 days old) by Hoover300 (Kentucky)   |   | |
Checkrate/Likes
 
     
|
Post# 446247 , Reply# 5   9/19/2021 at 17:59 (947 days old) by Gj9696 (Prosper)   |   | |
Checkrate/Likes
 
     
Sorry I got confused who's who. Damien is 2011Hoover700. The original part for the GE has a broken cord retainer. |
Post# 446248 , Reply# 6   9/19/2021 at 17:59 (947 days old) by Gj9696 (Prosper)   |   | |
Checkrate/Likes
 
     
I don't know anyone who 3D prints. |
Post# 446249 , Reply# 7   9/19/2021 at 18:01 (947 days old) by 2011hoover700 (owosso michigan)   |   | |
Checkrate/Likes
 
     
|
Post# 446251 , Reply# 9   9/19/2021 at 18:03 (947 days old) by Gj9696 (Prosper)   |   | |
Checkrate/Likes
 
     
And the only flaw it also has is the very top piece of the handle is missing. No biggie.😁 |
Post# 446252 , Reply# 10   9/19/2021 at 19:22 (947 days old) by huskyvacs (Gnaw Bone, Indiana)   |   | |
Checkrate/Likes
 
     
These GE uprights from this era are rare. I only ever seen one in my 4 years of collecting.
FlexSeal makes a clear colored sealant. Clean up the tube with some plastic polish and remove the scuffs and such, then brush over the cracked part with FlexSeal clear on the outside and inside and let it dry. It will seal up your tube for now until you can find a replacement. Also save eBay searches for that part, you never know when something will show up. Only other thing you can do is target all vacuum shops around you and eMail them asking if they have that part somewhere and they should be able to ship it to you. |
Post# 446258 , Reply# 11   9/19/2021 at 21:38 (947 days old) by vacuumman (California)   |   | |
Checkrate/Likes
 
     
Would it be possible to cut down the tube from the Volta or will that make the cord hook too low? |
Post# 446262 , Reply# 12   9/19/2021 at 22:42 (947 days old) by Gj9696 (Prosper)   |   | |
Checkrate/Likes
 
     
Vacuumman, maybe I can cut the cord hook part off and connect it on the original GE part? |
Post# 446269 , Reply# 13   9/20/2021 at 04:25 (947 days old) by vacuumman (California)   |   | |
Checkrate/Likes
 
     
Cutting the hook off and gluing it onto the old part may be possible, but it will most likely require an extremely strong glue. |
Post# 446290 , Reply# 14   9/20/2021 at 16:09 (946 days old) by Gj9696 (Prosper)   |   | |
Checkrate/Likes
 
     
Forgot to mention that when I was 7,I first saw this GE model from my mom's ex's late mom around late 2003. And I always wanted to use it but sadly never did. She sold it in 2011 because in 2009 she brought a Dyson DC14. |
Post# 446320 , Reply# 15   9/21/2021 at 10:23 (945 days old) by Gj9696 (Prosper)   |   | |
Checkrate/Likes
 
     
Hi vacuumman, here's what I did here last night. Not the best but for a while.
View Full Size
|
Post# 446323 , Reply# 16   9/21/2021 at 10:24 (945 days old) by Gj9696 (Prosper)   |   | |
Checkrate/Likes
 
     
2011Hoover700, Damien, does betam64 do 3D printing? Thanks. |
Post# 446360 , Reply# 17   9/21/2021 at 11:53 (945 days old) by Gj9696 (Prosper)   |   | |
Checkrate/Likes
 
     
Hook didn't stay on, oh well.😊
View Full Size
|