|
Thread Number: 41936
/ Tag: Pre-1950 Vacuum Cleaners
Hoover 541 restoration |
[Down to Last] |  |
| Post# 442679 6/6/2021 at 23:05 (1,053 days old) by Zenith12 (Canfield Ohio ) | ||
|
The resto was a bit more like a clean up I wanted to look 97 years old . I had to sandblast the adjuster and handle latch as they were too badly rusted that most of the platting was gone. Don’t worry that switch isn’t connected it’s bypassed. | ||
| Post# 442682 , Reply# 1 6/6/2021 at 23:56 (1,053 days old) by Hoover300 (Kentucky) | ||
Yeesh
You need a switch! I have a bakelite one to a rebuilt Hoover I'd sell, or there is this great condition original one. Looks like it just needs the screws! You may be able to get them down in price too. https://www.ebay.com/itm/Antique-Round-O... Otherwise, looks great! | ||
| Post# 442683 , Reply# 2 6/6/2021 at 23:56 (1,053 days old) by Hoover300 (Kentucky) | ||
|
Actually, an even better deal for a slightly nicer switch here: https://www.ebay.com/itm/324656748632QUE... | ||
| Post# 442827 , Reply# 3 6/11/2021 at 07:58 (1,049 days old) by bikerray (Middle Earth) | ||
It could definitely use a rebristling and should have wire rug guards to keep the rug from being sucked up into the vacuum.
View Full Size
| ||
| Post# 442894 , Reply# 4 6/12/2021 at 14:56 (1,047 days old) by bphelps (shoreline) | ||
 | ||
| Post# 442930 , Reply# 5 6/13/2021 at 20:26 (1,046 days old) by bphelps (shoreline) | ||
|
| ||
| Post# 442931 , Reply# 6 6/13/2021 at 20:28 (1,046 days old) by Hoover300 (Kentucky) | ||
|
Yep ic | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}