Thread Number: 41843  /  Tag: Brand New Vacuum Cleaners
Aerus Pigtail Hoses 		[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 442085   5/22/2021 at 05:00 (1,064 days old) by vacuumman (California)        

Does Aerus still make pigtail hoses for pre-1205 Electroluxes (F, R, G)?
Thanks.

Post# 442885 , Reply# 1   6/12/2021 at 13:09 (1,042 days old) by cleanairhybrid (Maryville, IL, USA)        

cleanairhybrid's profile picture
From what I've seen out there, they haven't made them in a while.

I've been trying to find a 3rd party hose for my Model G and that is also impossible it seems.

Thankfully other collectors have helped finding hoses for my G.

Best of Luck,
Kyle


Post# 443752 , Reply# 2   7/10/2021 at 13:48 (1,014 days old) by Jo (Dallas,TX)        
Yes they do

 The above response is incorrect. Aerus does still make the pigtail hoses…look down further on the vintage page threads from my post about this in early June this year. I had a long visit with my Moms Aerus rep Rich, in Denville NJ and he verified that yes, they are still available but due to low demand aren’t stocked in the store but all you have to do is ask for one and they will place the order for you. They are special order but yes, still available. If you prefer to get a generic you can go to hescoinc.com and order one by looking on the parts page then selecting Electrolux then hoses and you’ll see one. Also you can search eBay there available.

Jon

Post# 444692 , Reply# 3   8/13/2021 at 14:44 (980 days old) by mjhoshaw (Western PA)        

Thank you Jo, this is wonderful news, and I just now messaged Aerus of Denville about ordering a hose. I have a recent (black pigtail) hose in good condition, but I want a spare because I use my AE, G, and L regularly.

I would love to know how many pigtail hoses this branch office orders based on this and your other post!

Best,

Joel

Post# 445355 , Reply# 4   8/30/2021 at 00:08 (964 days old) by Jo (Dallas,TX)        
Joel….

 That’s funny! I called Rich earlier this month about needing a reset switch for my power nozzle and he didn’t mention anything about anyone requesting the pigtail hoses but I’m sure if he gets an influx of people wanting them he might soon figure out that it was me. I believe though that you could order through any Aerus branch. I have heard on here that the Richmond, Virginia branch owner’s son restores older models so I bet they order and perhaps stock the pigtail hoses.

Unfortunately the pigtail hoses I believe no longer come with the swivel lock piece…so you’ll need to remove and keep yours and transfer it to the new hose. Those are discontinued…now why…I don’t know…it was essentially useful and fits for all models that use a pigtail hose except the model R which it must be removed for…hence why they were always a slip on part included with the hose but removable for customers purchasing to be used with a model R.

Actually…let me know if yours comes with it or not. If you don’t know what piece I’m talking about it is a plastic ring that fits on the machine end of the hose and has a section that fits in the rectangular slot below the hose opening on model L’s or in the automatic control dial channel on model F’s and G’s. It usually has a raised square on the top side.

Jon

Post# 445417 , Reply# 5   8/31/2021 at 17:07 (962 days old) by mjhoshaw (Western PA)        
Apparently no longer available after all

 I contacted Rich via the "Contact Us" link on their home page. He replied a few days later. He said that currently his order form shows that the pigtail hoses are unavailable/discontinued (I don't recall his exact words), but that he would check with the home office to see if they still have any. Unfortunately they don't, so Rich was unable to get me one.

It's too bad that the branch offices can't work together to find any remaining stock (if any) and work with each other and us to get it into our hands. Not worth their trouble, I suppose, since cleaners that used pigtail hoses haven't been made for years. I would be surprised if there are truly no more of these hoses out there; however, locating them will be very difficult.

I wish my news was more upbeat.

Joel

Post# 445617 , Reply# 6   9/4/2021 at 19:15 (958 days old) by Jo (Dallas,TX)        
Joel

 Well here is a used genuine one on eBay currently.

https://www.ebay.com/itm/373702643478QUE...

Jon

CLICK HERE TO GO TO Jo's LINK on eBay


Post# 445620 , Reply# 7   9/4/2021 at 19:42 (958 days old) by mjhoshaw (Western PA)        
Someone else probably needs it more than I do

 Thanks for posting this. I will pass, as I do have a good late (black cord) pigtail hose that came with my model G. It's a bit squashed in one area but not enough to affect performance. These hoses last and last.

Joel

Post# 445674 , Reply# 8   9/6/2021 at 09:31 (956 days old) by Jo (Dallas,TX)        
Repairing the squished area

 I know what you mean about the squished area and that is actually repairable. What I’ve done is carefully insert the hose into a workbench vice with the long ends of the squished area against the vice paddles. Gently tighten the vice to apply some pressure to reround the coils. Do it carefully and do t apply too much pressure so as not to overdo it. I do a little at a time checking my results by loosening and if it needs more do it again tightening a little bit more each time until I’m happy with the results.

Yeah that hose on eBay is the first version of the vinyl ones by the solid color and it’s pricey too. I’ve been able to get them newer and less expensive.

I’m experimenting with taking an upright genuine hose, the one with the solid rubber machine end and adding a metal machine end via adapters, pvc pipes and hose clamps available in the plumbing department! I do a lot of remodeling so am familiar with what’s available plumbing wise so I think I will have a good solution and it seems the upright genuine hoses are plentiful and of course still in production as they come with the upright machines today.

I know there are generic options available but those seem to be quite pricey for something generic that perhaps may not last as long nor have the swiveling handle feature which makes using the genuine pigtail hoses much easier to use.

Jon


Forum Index:       Other Forums:                      


Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members Click Here To Sign Up.



                     

automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
 Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals 		Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy