|
Thread Number: 41650
/ Tag: 50s/60s/70s Vacuum Cleaners
How to wire replacement power nozzle motor Epic 3500 SR |
[Down to Last] |  |
| Post# 440860 , Reply# 1 4/14/2021 at 09:36 (1,106 days old) by vacuumkid47 (Sibley, IA) | ||
 | ||
| Post# 440882 , Reply# 2 4/14/2021 at 20:09 (1,106 days old) by Lesinutah (Utah) | ||
Basic
This isn't a how to its a general instructions.
You have usually 2 sets of wires. You get the wires coming in from power source. The other is from the motor. Yellow wires or positive are usually black, red or blue. Neutral is with yellow or any color with a white line. Tbe power cord wires coming in either split sending a set t of wires to the motor and the other to the light. There is more to it but black to black white to white etc. | ||
| Post# 440886 , Reply# 3 4/14/2021 at 21:06 (1,106 days old) by Gabowenjr (tampa fl) | ||
|
Wiring it up I have a quick question for you. Does your replacement motor have wires already attached or just clips attached to the motor. Here are 2 schematics that might help you. If you need more help please let me know. | ||
| Post# 440902 , Reply# 4 4/15/2021 at 10:48 (1,105 days old) by sduff7163 (Southgate) | ||
|
Epic 3500 SR Thank you all for the info! The images are especially helpful and I'll be wiring it today! Best Regards | ||
| Post# 440964 , Reply# 5 4/17/2021 at 11:44 (1,103 days old) by vacuumdevil (Vacuum Hell ) | ||
 | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}