Thread Number: 41619
/ Tag: 50s/60s/70s Vacuum Cleaners
Hoover Convertible Belt Replace |
[Down to Last] |
Post# 440654 , Reply# 1   4/8/2021 at 15:01 (1,106 days old) by bikerray (Middle Earth)   |   | |
Checkrate/Likes
 
     
|
Post# 440656 , Reply# 2   4/8/2021 at 15:12 (1,106 days old) by huskyvacs (Gnaw Bone, Indiana)   |   | |
Checkrate/Likes
 
2    
|
Post# 440671 , Reply# 3   4/9/2021 at 14:09 (1,105 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)   |   | |
Checkrate/Likes
 
2    
|
Post# 440678 , Reply# 4   4/9/2021 at 17:38 (1,105 days old) by kirbyklekter (Concord,Ca.)   |   | |
Checkrate/Likes
 
     
Letting the belt soak in hot water for 10 or 15 minutes.Then load it on the way the others mentioned above. I did get a belt once that there was no way I could stretch it enough to mount. That's rare but it could happen.Good luck. |
Post# 440693 , Reply# 5   4/9/2021 at 22:59 (1,105 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)   |   | |
Checkrate/Likes
 
     
|
Post# 440729 , Reply# 7   4/11/2021 at 11:47 (1,103 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)   |   | |
Checkrate/Likes
 
1    
|
Post# 440774 , Reply# 8   4/12/2021 at 10:39 (1,102 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)   |   | |
Checkrate/Likes
 
1    
|