|
Thread Number: 39444
/ Tag: 50s/60s/70s Vacuum Cleaners
Finally got the Omega done |
[Down to Last] |  |
Post# 418505 1/11/2020 at 18:16 (1,565 days old) by rodknock95  (Salem, Missouri) |
||
|
It came to me as just as a motor........Everything got replaced on this, except the motor guts...all new plastic, nos bag, fan, bearings, brushes, brushroll and decals. | ||
| Post# 418511 , Reply# 1 1/11/2020 at 21:48 (1,565 days old) by texaskirbyguy (Plano, TX) | ||
|
That is top-notch work to say the least - looks just like it came out of the box for the first time. SUPER polishing job!! There is something to be said about that classy rosewood brown against a chrome finish... | ||
| Post# 418513 , Reply# 2 1/11/2020 at 22:14 (1,565 days old) by MadMan (Chicago, IL, USA) | ||
 | ||
| Post# 418515 , Reply# 3 1/11/2020 at 22:18 (1,565 days old) by Vac-o-matic (Saint Louis, Mo.) | ||
|
Beautiful! Your hard work paid off! | ||
| Post# 418516 , Reply# 4 1/11/2020 at 22:19 (1,565 days old) by Lesinutah (Utah) | ||
Nice | ||
|
Post# 418532 , Reply# 5 1/12/2020 at 09:51 (1,565 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640) |
||
I must say............... | ||
|
Post# 418541 , Reply# 7 1/12/2020 at 14:21 (1,565 days old) by KirbyClassicIII (Milwaukie, Oregon) |
||
rodknock95 | ||
| Post# 418545 , Reply# 8 1/12/2020 at 17:49 (1,564 days old) by texaskirbyguy (Plano, TX) | ||
|
Ben, This was probably an owner-made mod. A legit shop would most likely not take the liability risk of bypassing the safety switch like what was done on Blaze's machine. | ||
|
Post# 418555 , Reply# 9 1/12/2020 at 19:41 (1,564 days old) by KirbyClassicIII (Milwaukie, Oregon) |
||
|
texaskirbyguy | ||
|
Post# 418564 , Reply# 10 1/12/2020 at 20:16 (1,564 days old) by kloveland (Tulsa) |
||
The Omega looks great! | ||
|
Post# 418575 , Reply# 11 1/12/2020 at 23:36 (1,564 days old) by rivstg1 (colorado springs) |
||
safety switch bypass | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}