Thread Number: 39237  /  Tag: Wanted to Buy Items
Wanted: Part for Royal Model 501
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 416287   11/21/2019 at 10:23 (1,589 days old) by fawmaine (Portland, Maine)        

Am seeking a part for my Royal 501. The part is a nozzle guard and is part number 1-501270-000 and shown in the original manual. If you need photo I will email same to you if you can provide email address. If part is available from a source on the forum please reply to me at fawphotoarts@gmail.com and we can discuss terms to purchase same.
Frederic Whiting
207-210-6015
fawphotoarts@gmail.com


Post# 416318 , Reply# 1   11/21/2019 at 20:56 (1,588 days old) by Lesinutah (Utah)        
Hey

lesinutah's profile picture
There isn't a set of manuals for royals. There is 2 or 3 people on a vacuum collectors here that know it.
Pics would be needed please. Please don't assume we know the part. If you show us you probably will get an answer.
Les


Post# 416327 , Reply# 2   11/22/2019 at 02:27 (1,588 days old) by rivstg1 (colorado springs)        

rivstg1's profile picture
I second Les' comment

Post# 416346 , Reply# 3   11/22/2019 at 13:10 (1,588 days old) by fawmaine (Portland, Maine)        
Photos of Royal part inside and outside

Enclosed are photos as requested. Thanks for your suggestion.
Frederic


  Photos...       <              >      Photo 1 of 2         View Full Size
Post# 416369 , Reply# 4   11/22/2019 at 21:42 (1,587 days old) by Lesinutah (Utah)        
Ic

lesinutah's profile picture
I have one I have a few. I'd be happy to sell you one. If you also check your local thrift store sooner rather than later you would probably find one. The shipping cost and the park cost without way the value of the vacuum which is approximately 10 to $15. I was told from my local vacuum shop and from start vacuums in Spokane Washington that one royals went to China on a 2001 I believe that was the time that they were told to destroy all their old service manuals That's why you're not going to find any or many.
Les


Post# 416388 , Reply# 5   11/23/2019 at 09:51 (1,587 days old) by fawmaine (Portland, Maine)        
501 parts wanted

Les,

Can you provide one nozzle guard ? If so let me know the price and the cost to mail it to me in Portland Maine 04101. Can you grade same as excellent or better ? What are your terms to process the transaction ? Thanks.
Frederic


Post# 416398 , Reply# 6   11/23/2019 at 15:04 (1,586 days old) by Lesinutah (Utah)        
Nozzle gaurd

lesinutah's profile picture
Give me a day or so to get it then grade it. I'm pretty sure I can get in in excellent condition .
Les


Post# 416404 , Reply# 7   11/23/2019 at 18:14 (1,586 days old) by fawmaine (Portland, Maine)        
Nozzle Guard

Thanks. That is good news. That will get a machine back in working condition. Have a good weekend.

Frederic


Post# 416502 , Reply# 8   11/25/2019 at 21:48 (1,584 days old) by Lesinutah (Utah)        
Hey

lesinutah's profile picture
I'll get a picture of it tommorow. Been winterizing yard and house last couple days. Just got back from school.
I know I have the part I know I have in mint condition. If it's not mint I'll polish making it mint but i remember i used a 501 with blue bag and cord as a parts machine. I only took power switch and sold the bag to a kid. I have about 10-15 royal is have the part I know where it's at.
I could mail anytime but my gut instinct is wait until Wednesday next week. Black Friday, cyber Monday busiest week of mail of the year.
I'm afraid it would get lost . Email me at lesinutah@hotmail.com.
Long day
Les


Post# 416718 , Reply# 9   11/29/2019 at 19:20 (1,580 days old) by fawmaine (Portland, Maine)        
Nozzle Guard

Thanks for the update. I will check for new info early next week.
Frederic


Post# 416728 , Reply# 10   11/29/2019 at 22:41 (1,580 days old) by Lesinutah (Utah)        
Hey

lesinutah's profile picture
I have it I'll post pic tommorow. If payment and shipping taken care of it will be n the mail on Monday. I'm getting a bubble envelope for an item I ordered tommorow. Shipping will be less than $5. Email me at lesinutah@hotmail.com get everything wrapped up. Pic should be up by noon tomorrow mountain standard time. With your zip I'm guessing Friday you'd reviews it.
Les


Post# 416734 , Reply# 11   11/30/2019 at 02:37 (1,580 days old) by Lesinutah (Utah)        
Pic

lesinutah's profile picture
Here it is. I'm going to sand tommorow with 800 grit and maybe up to 2000 wet sand.
Les


  Photos...       <              >      Photo 1 of 2         View Full Size
Post# 416875 , Reply# 12   12/3/2019 at 14:34 (1,576 days old) by fawmaine (Portland, Maine)        
nozzle guard 501

I am sorry to say that the piece shown in your photo is not the same as the one I posted. Mine has no screw holes and snaps on the housing. It measures 6 5/8 " x 1 15/16 ". Can you check out your stock and see if what I need turns up ?
Frederic


Post# 416889 , Reply# 13   12/3/2019 at 22:12 (1,576 days old) by Lesinutah (Utah)        
Hey

lesinutah's profile picture
I have the correct head. I was. Moving everything to my shed. I have a big tote of royal handvacs.
Keep in mind your picture is generic photo. The one I know will fit I'll try to get pic of it on a 501 prince.
That way the vacuum exactly like yours head may be slightly different or it was just in box and is for a vacuette I parted out
Les


Post# 416891 , Reply# 14   12/3/2019 at 22:14 (1,576 days old) by Lesinutah (Utah)        
Check

lesinutah's profile picture
Your nozzle if it has screw holes. I thought plastic royal handvacs got plate like yours.

Post# 416967 , Reply# 15   12/5/2019 at 19:59 (1,574 days old) by KirbyClassicIII (Milwaukie, Oregon)        

kirbyclassiciii's profile picture
No, the 501 rug plate never had screw holes.

~Ben


Post# 417013 , Reply# 16   12/6/2019 at 20:45 (1,573 days old) by Lesinutah (Utah)        
Ok

lesinutah's profile picture
Thank you Ben.
Les


Post# 417704 , Reply# 17   12/28/2019 at 19:57 (1,551 days old) by fawmaine (Portland, Maine)        
Nozzle guard and/or rug plate

I am sorry for not responding. Have you had any luck locating the part. Ben stated that the nozzle guard I need has no screw holes. Let me know when you can.

Frederic


Post# 417706 , Reply# 18   12/28/2019 at 20:43 (1,551 days old) by Lesinutah (Utah)        
I have it

lesinutah's profile picture
I found it right before Christmas. I could not get to my d80 handi Butler. I'll post pics just spaced it.
Les


Post# 417729 , Reply# 19   12/29/2019 at 12:00 (1,551 days old) by Lesinutah (Utah)        
Pic

lesinutah's profile picture
I found it. It has the arrow where the brush roll direction. It has no writing on it. I put a wood ruler showing 6 plus inches long and I'll call it 2 inches. It came from a 501 prince.
I used steel wool got it cleaned off residue. It originally had a paper type gasket. You can easily make your own. I just wanted to mention so you get it original as possible. Im pretty sure my plate came original and the ones that have caution were what royal sold as OEM replacement.
Les


  Photos...       <              >      Photo 1 of 5         View Full Size
Post# 417752 , Reply# 20   12/29/2019 at 21:11 (1,550 days old) by fawmaine (Portland, Maine)        
nozzle guard

Les,
That piece looks fine. Let me know your terms for the sale and I will reply. Thanks.
Frederic


Post# 417755 , Reply# 21   12/29/2019 at 21:21 (1,550 days old) by Lesinutah (Utah)        
Email

lesinutah's profile picture
Hey
I just emailed you just reply back with name and address so I can get shipping quote.
Les



Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy