Thread Number: 38688
/ Tag: 50s/60s/70s Vacuum Cleaners
Hoover experts: missing Convertible U4007 speed switch actuator 18588 |
[Down to Last] |
Post# 411126 , Reply# 1   7/3/2019 at 09:05 (1,752 days old) by kloveland (Tulsa)   |   | |
Checkrate/Likes
 
     
|
Post# 411128 , Reply# 2   7/3/2019 at 09:34 (1,752 days old) by bnsd60m9200 (Akron OH)   |   | |
Checkrate/Likes
 
     
|
Post# 411136 , Reply# 4   7/3/2019 at 11:41 (1,752 days old) by 2011hoover700 (owosso michigan)   |   | |
Checkrate/Likes
 
     
|
Post# 411234 , Reply# 6   7/6/2019 at 18:22 (1,749 days old) by Kloveland (Tulsa)   |   | |
Checkrate/Likes
 
     
|
Post# 411240 , Reply# 7   7/6/2019 at 22:57 (1,748 days old) by bnsd60m9200 (Akron OH)   |   | |
Checkrate/Likes
 
1    
|
Post# 411254 , Reply# 9   7/7/2019 at 11:03 (1,748 days old) by Kloveland (Tulsa)   |   | |
Checkrate/Likes
 
2    
Just switch the wires around coming from the motor on the switch. It should look like this and connected just like in the attached picture. It'll run fine without the arm it just won't engage the motor into high speed when using the attachments. I three u4003s.
|