|
Thread Number: 38355
/ Tag: 50s/60s/70s Vacuum Cleaners
electrolux metal canisters Bumpers |
[Down to Last] |  |
Post# 408149 4/15/2019 at 21:01 (1,831 days old) by rodknock95  (Salem, Missouri) |
||
|
How do you get the bumpers off these for painting? A 50 Jubilee is the one that I am wanting to paint. | ||
| Post# 408183 , Reply# 2 4/16/2019 at 08:46 (1,830 days old) by rugsucker (Elizabethton TN) | ||
|
1205(& newer)bumper removal Front or rear is same.As above most rubber parts are easier to work with warm.Use hair dryer or leave in car in sun,etc.Then run a small flat screwdriver gently under bottom and the at front(or rear)move forward(or backward)at least 1/4 inch, then away from body,then slide off. | ||
| Post# 408209 , Reply# 3 4/16/2019 at 18:56 (1,830 days old) by Paul (USA) | ||
|
Thanks for the details, Jimmy. | ||
| Post# 408246 , Reply# 5 4/17/2019 at 08:30 (1,829 days old) by rugsucker (Elizabethton TN) | ||
|
quebecois You may be thinking of the plastic body Electrolux first seen in Canada and in US after 1985.The 50th Jubilee rodknock95 is painting is metal body with the mounting strip for rubber bumper welded to side of body. | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
