|
Thread Number: 37987
/ Tag: Recent Vacuum Cleaners from past 20 years
Kirby Brushroll Question |
[Down to Last] |  |
| Post# 404854 1/30/2019 at 23:44 (1,905 days old) by repairman (Woodridge, IL) | ||
|
Will a Sentria Brushroll fit in a G4 brush head? | ||
Post# 404855 , Reply# 1 1/31/2019 at 00:55 (1,905 days old) by rivstg1  (colorado springs) |
||
yes | ||
|
Post# 404856 , Reply# 2 1/31/2019 at 01:41 (1,905 days old) by KirbyClassicIII (Milwaukie, Oregon) |
||
repairman
Mike,
Not quite: the magnet for the brush indicator light on the G3/G4 and G5/Avalir II brush rolls will be in a different position depending on the models involved. The G3/G4 nozzle had the indicator light on the side of the nozzle where the toe-touch control is, while that for the G5/Avalir II had it on the side facing the bag. Part numbers of the revolving brush assemblies: 156293 = for G3 and G4, brush indicator light magnet is on side of brush roll facing toe-touch control 152502 = for G5 to Avalir II, brush indicator light magnet is on side of brush roll facing bag 152505 = for G5 to Avalir II (stiffer bristles), same attributes as 152502 Hope this helps you! ~Ben | ||
| Post# 404864 , Reply# 3 1/31/2019 at 10:50 (1,904 days old) by sptyks (Skowhegan, Maine) | ||
 | ||
|
Post# 404888 , Reply# 4 2/1/2019 at 00:51 (1,904 days old) by rivstg1 (colorado springs) |
||
|
Oops. I forgot | ||
|
Post# 404893 , Reply# 5 2/1/2019 at 04:00 (1,903 days old) by KirbyClassicIII (Milwaukie, Oregon) |
||
|
rivstg1 | ||
| Post# 405086 , Reply# 6 2/5/2019 at 02:08 (1,900 days old) by vacuumdevil (Vacuum Hell ) | ||
BoJack horseman vacuum service. | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
