|
Thread Number: 37921
/ Tag: Pre-1950 Vacuum Cleaners
P.A.Geier(Royal) Model 83 |
[Down to Last] |  |
| Post# 404222 1/18/2019 at 09:21 (1,915 days old) by Ron6519 (East Williston, NY) | ||
|
I'm in the process of restoring this vacuum and need a source for the missing hand grip and beater bar. Thanks Ron | ||
| Post# 404235 , Reply# 1 1/18/2019 at 15:00 (1,914 days old) by Lesinutah (Utah) | ||
Hey
Im pretty sure yours uses square end 14 inch.
I'll provide links to the ones I got for mine. They do fit and work. Les Link in URL is for handle. https://rover.ebay.com/rover/0/0/0QUESTI... I'm adding pics of listing. If I remember if either one is make offer do it for $10 less on brush roll. CLICK HERE TO GO TO Lesinutah's LINK on eBay | ||
| Post# 404238 , Reply# 2 1/18/2019 at 15:07 (1,914 days old) by Lesinutah (Utah) | ||
|
Hey
Is the fan okay on the vacuum. Ben kindly found one to fit mine and I looked everywhere.
I also used led lights. I added pics. The second pic is a little longer. The first one took 3 weeks to get. Someone mentioned Lowe's carrying them. Sylvania 1650 is bulb number for regular light. If you need belts Kirby belts work. Hopefully your vacuum comes out of well. I have only had 2 days off in last 2 weeks. I polished but haven't found solder gun to finish mine. If you have any pics of wiring I'd appreciate it. Im mainly concerned about 2 carbon brush wires but any wiring pics would help. Les | ||
| Post# 404281 , Reply# 4 1/19/2019 at 15:51 (1,913 days old) by Ron6519 (East Williston, NY) | ||
|
The fan was in decent shape. All of the fins were intact. There was some depressions on the back where the flat head screws loosened up an ate away some metal. After I test the motor I'll decide if I need to fill in those recesses. I put blue thread lock on the screws when I reinstalled them. Ron | ||
| Post# 404293 , Reply# 5 1/19/2019 at 16:53 (1,913 days old) by Lesinutah (Utah) | ||
|
Hey
It says it's 14 but it we'll fit I know the good example is the Kirby brush rolls in 13in and the actual brush itself is 12 and 4 so they always added little bit of length but the 14th brush roll will fit because the two the vacuums that I have it say it fits the 13-inch with brushroll and major it's the same length that you mentioned but it will fit.
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}