|
Thread Number: 37916
/ Tag: Wanted to Buy Items
Needed: Avalir Shampooer Tray |
[Down to Last] |  |
| Post# 404207 , Reply# 1 1/17/2019 at 16:07 (1,918 days old) by bnsd60m9200 (Akron OH) | ||
zippbrush
i wouldnt expect components less than 5 years old to fail like that, but knowing how much above the floor cleaning you use the zippbrush for, it needs oil in the babbot bearing. pop the rotating brush out and oil it. far as the failing reno brushroll thats unusual. i usually lubricate kirby brushrolls every 5 years or as free spinning by hand becomes difficult. marvel mystery oil om the roller bearing brushrolls common with new g series will re moisten the grease and prolong wear a bit.
cant help with that parts as you know, i dont have anything that new. | ||
| Post# 404216 , Reply# 2 1/18/2019 at 01:28 (1,918 days old) by Lesinutah (Utah) | ||
Hey
You have to use an avalir waste tray. No other models will fit .
You either have the wrong belt, brushroll on backwards or screws holding brush roll are too tight not spinning. I attached a link to one on ebay. It with shipping will be under $15. Les CLICK HERE TO GO TO Lesinutah's LINK on eBay | ||
| Post# 404382 , Reply# 3 1/21/2019 at 18:14 (1,914 days old) by Jeschbac (Texas) | ||
|
Thanks, but like I wrote, "I don't need the lift-out "spent water" tray." | ||
| Post# 404403 , Reply# 4 1/22/2019 at 02:31 (1,914 days old) by Lesinutah (Utah) | ||
|
Hey | ||
| Post# 404481 , Reply# 5 1/23/2019 at 17:40 (1,912 days old) by Jeschbac (Texas) | ||
|
Thanks A brand new one there costs about $80, and I'd rather find something used if at all possible. | ||
| Post# 404553 , Reply# 6 1/24/2019 at 19:19 (1,911 days old) by Lesinutah (Utah) | ||
|
Hey | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
