Thread Number: 37662  /  Tag: 50s/60s/70s Vacuum Cleaners
Project 510
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 401542   11/27/2018 at 18:41 (1,948 days old) by Hmc1981 (St. Augustine, Florida)        

hmc1981's profile picture
Hello!

Some of you may remember when I posted about a D80 I brought back to life. At that time I was not aware how well it would come out, so I only had a couple of “before” pictures.

This time, I have several “before” pics of this 510. I like to call this project “The Sad Kirby Diary —- A Road to Repurpose.” Lol. Stupid, but I’m excited about this project and I hope it all comes out ok.

Anyhoo, I managed to make some progress on the nozzle this evening. Here are some pictures (most before and a couple of the nozzle as it is currently). I’ll post as things go along. Oh... it runs like a champ! It does need a new front bearing and new carbons. Also a new bag, but all that’s in place and will come after the metal is finished.


  Photos...       <              >      Photo 1 of 8         View Full Size
Post# 401545 , Reply# 1   11/27/2018 at 19:29 (1,948 days old) by texaskirbyguy (Plano, TX)        

Looks a bit crusty but you are cutting right through to beautiful metal! Keep up the good work!!
The bag looks like it is full of carpet fresh and the unit had sat out in the rain.
However, it should all clean up - wash that bag in a bucket and you might be in for a pleasant surprise!
Feel free to check out the full resto on my 505 (link below) - it is very similar to the 510 and may help you out in places.
Keep us updated!
www.vacuumland.org/cgi-bi...


Post# 401546 , Reply# 2   11/27/2018 at 19:55 (1,948 days old) by hmc1981 (St. Augustine, Florida)        
Texaskirbyguy

hmc1981's profile picture
I remember reading the progress of your 505 - that’s a model I’d LOVE to have!

I’m glad you posted the link because there’s info in there which really will help me along, thank you!

I’m really looking forward to having this machine complete. I haven’t had a sad Kirby in a while, and it’s always fun making them happy again!

The oxidation on this one is fairly heavy, but the D80 I restored was about the same. The bag on this one sadly has a lot of holes around the base so I’m not sure it’ll be put into service, but I do plan on cleaning it and seeing what transpires. I’m thinking to work on one piece each evening. Once all parts are cleaned up, then take a day and put them all on the buffing wheel.

From what I know, it sat out in a shed for many many many years (likely decades). The bag wasn’t very full, but there was a lot of organic debris in the emtor - leaves and dirt.

It’s always fun to take the worst of the worst and make them perfect again. It’s fun to bring them back to life.


Post# 401556 , Reply# 3   11/27/2018 at 23:52 (1,948 days old) by MadMan (Chicago, IL, USA)        

madman's profile picture
Nice improvement.

Post# 401608 , Reply# 4   11/28/2018 at 19:26 (1,947 days old) by texaskirbyguy (Plano, TX)        

HMC, I, too enjoy the satisfaction of bringing the near dead back to life or making the ugly beautiful again.
If the holes in the bag are not too big, you could fit a cloth HEPA bag inside of the outer bag like I did to my 505. This way you could use it until you find another outer bag. Or if you plan to use it more for show or occasional use, leave it that way.
Keep on polishin'! :o)



Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy