Thread Number: 37445
/ Tag: 50s/60s/70s Vacuum Cleaners
wands rusting metal extension tube vacuum stuck!?!?!? |
[Down to Last] |
Post# 399501   10/13/2018 at 22:24 (2,020 days old) by compactc9guy (Bathurst NB)   |   | |
Checkrate/Likes
 
     
My vacuum cleaner wands are from a older model forget what it was, ive kept good parts but they get stuck together!!Darn ..
2 metal tube how to prevent vacuum cleaner extension form getting stuck .Kenmore i think i use em on my Compact or electrolux canister but cannot separate the two wands .Now its one long tube brush or hose comes off fine but the wand make one lonnnng tube.Now i have to force and turn to get em in 2 separate tube any tip i thought sanding it down ???They are old and a bit of rust inside must be preventing the 2 metal tube from separating. |
Post# 399506 , Reply# 2   10/13/2018 at 23:35 (2,020 days old) by compactc9guy (Bathurst NB)   |   | |
Checkrate/Likes
 
     
|
Post# 399511 , Reply# 3   10/14/2018 at 00:58 (2,020 days old) by tolivac (Greenville,NC)   |   | |
Checkrate/Likes
 
     
Before the WD40 treatment-try dropping the wand on a carpeted floor a few times-the vibration can knock them loose. |
Post# 399519 , Reply# 4   10/14/2018 at 02:14 (2,020 days old) by MadMan (Chicago, IL, USA)   |   | |
Checkrate/Likes
 
     
|
Post# 399543 , Reply# 6   10/14/2018 at 13:35 (2,019 days old) by compactc9guy (Bathurst NB)   |   | |
Checkrate/Likes
 
     
My basement humidity is control by my heat exchanger dehumidifier ill have a look at it thank you .Now these are old wands use on many machine and stored in basement all year long could have water damage from past year they have been there a while per say .Il wash wax and scrum and new soon thank you alll for the good comments.
|