Thread Number: 37366
/ Tag: Brand New Vacuum Cleaners
Got a new Kirby G3/4 stretch hose but one problem. |
[Down to Last] |
Post# 398715   9/24/2018 at 21:47 (2,012 days old) by Gj3476 (Prosper,TX)   |   | |
Checkrate/Likes
 
     
So a few days ago I got a new stretch hose for my Kirby G3 and it’s really cool looking till I found out on the end I saw a tear. How did this happen and is it there a way to fix it? I already let the seller know.
|
Post# 398733 , Reply# 2   9/25/2018 at 02:22 (2,011 days old) by huskyvacs (Gnaw Bone, Indiana)   |   | |
Checkrate/Likes
 
     
|
Post# 398734 , Reply# 3   9/25/2018 at 02:36 (2,011 days old) by Gj3476 (Prosper,TX)   |   | |
Checkrate/Likes
 
     
|
Post# 398735 , Reply# 4   9/25/2018 at 02:39 (2,011 days old) by Gj3476 (Prosper,TX)   |   | |
Checkrate/Likes
 
     
|
Post# 398745 , Reply# 5   9/25/2018 at 08:24 (2,011 days old) by Gj3476 (Prosper,TX)   |   | |
Checkrate/Likes
 
     
|
Post# 398774 , Reply# 6   9/25/2018 at 21:43 (2,011 days old) by Gj3476 (Prosper,TX)   |   | |
Checkrate/Likes
 
     
So I switched the G3/4 hose adapter off of the stretch hose and put on the standard 7 ft hose that came with the attachment set and also I used the zip brush with the standard hose and the brushes was spinning like crazy! Way much better than the stretch hose! And I also placed the G5/Avalir 2 adapter on the stretch hose and see if I can get a trade or something else to get a standard one.
|
Post# 398797 , Reply# 7   9/26/2018 at 12:33 (2,010 days old) by Vacuumdevil (Vacuum Hell )   |   | |
Checkrate/Likes
 
     
|
Post# 398799 , Reply# 8   9/26/2018 at 14:21 (2,010 days old) by huskyvacs (Gnaw Bone, Indiana)   |   | |
Checkrate/Likes
 
     
|