Thread Number: 37362
/ Tag: Member Selling Item(s)/Non Professionally
Thinning the herd, again. |
[Down to Last] |
Post# 398647   9/23/2018 at 17:03 (2,035 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
I've got too many vacuums again! I'm open to reasonable offers. Prices do not include shipping. To get the best price i will be shipping via USPS, unless another carrier is desired.
Lewyt 97 $40 A project machine i just don't wish to put the time into. The gasket was gone so it's been replaced with weather stripping which occasionally falls out of place. The full bags need it's inlet trimmed a little bit to work but it's nice to be able to use hepa bags in it. See link for video. CLICK HERE TO GO TO Blackheart's LINK |
Post# 398648 , Reply# 1   9/23/2018 at 17:06 (2,035 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
Both motors some some signs of use just the motor unit, hose, wands, PN, manual, and 2 spare bags. No after filter as the one in it was filthy. $50
CLICK HERE TO GO TO Blackheart's LINK
View Full Size
|
Post# 398649 , Reply# 2   9/23/2018 at 17:16 (2,035 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
Beam 2100 $75
I don't need 2 central vacs. This would be a good bench or garage vac. Excuse the dust flying around it's been months since i've run it. CLICK HERE TO GO TO Blackheart's LINK
View Full Size
|
Post# 398650 , Reply# 3   9/23/2018 at 17:22 (2,035 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
Hoover Constellation 86 $40
Has some rust and spots. The cord has a few worn areas too. The hose switch doesn't work properly. It had a nail embedded in it's hose which was causing it to turn on whenever the hose was inserted. I removed that portion of the hose and I cannot find the source of the tiny wire that ran to the 2nd contact so the connectors were bridged so the machine runs whenever the hose is inserted unfortunately. I'm sure there's a Hoover expert out there that can fix this. CLICK HERE TO GO TO Blackheart's LINK
View Full Size
|
Post# 398651 , Reply# 4   9/23/2018 at 17:38 (2,035 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
Black Canvac Powerpack $40
Running condition. The tool end of the hose was replaced it's missing one of it's wands. the original tool end snapped off inside the wand and i was unable to remove it without damaging the wand. The short hose on the PN also needed to be replaced. It comes with a 2 pack of belts and 2 spare bags. I didn't realize that I didn't take a photo of it until i had put it back into it's box, so I just used a still from the video. CLICK HERE TO GO TO Blackheart's LINK
View Full Size
|
Post# 398652 , Reply# 5   9/23/2018 at 17:46 (2,035 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
I've been told this is a Lux model 12 $30
A local vac shop called me to tell me what he had acquired I figured I could find a new home for it. I was told that the original owners said it worked but i cannot confirm this. The hose connector seems to be stripped out as the hose will not screw into it. I mostly think it'd make a nice display. CLICK HERE TO GO TO Blackheart's LINK
View Full Size
|
Post# 398653 , Reply# 6   9/23/2018 at 17:58 (2,035 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
Powercast RY9200 $100
It's just not my type of machine. I just want to get back what i paid for it. CLICK HERE TO GO TO Blackheart's LINK |
Post# 398654 , Reply# 7   9/23/2018 at 17:59 (2,035 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
Forgot the pic. Also the upper cord wrap doesn't work and I have the rubber bumper but it really has no attachment points so it does fall off.
View Full Size
|
Post# 398793 , Reply# 8   9/26/2018 at 10:43 (2,032 days old) by Kirbyvertibles (Independence, KS)   |   | |
Checkrate/Likes
 
     
|
Post# 398802 , Reply# 9   9/26/2018 at 15:42 (2,032 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
|
Post# 399724 , Reply# 10   10/18/2018 at 14:51 (2,010 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
|
Post# 400225 , Reply# 11   10/31/2018 at 22:34 (1,997 days old) by weltron (Michigan)   |   | |
Checkrate/Likes
 
     
Is the Constellation still available? |
Post# 400226 , Reply# 12   10/31/2018 at 22:52 (1,997 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
|
Post# 400270 , Reply# 13   11/1/2018 at 12:49 (1,996 days old) by weltron (Michigan)   |   | |
Checkrate/Likes
 
     
Thanks for the update |
Post# 400427 , Reply# 14   11/5/2018 at 08:14 (1,992 days old) by 2011hoover700 (owosso michigan)   |   | |
Checkrate/Likes
 
     
|
Post# 400471 , Reply# 15   11/6/2018 at 18:54 (1,991 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
|