Thread Number: 37312
/ Tag: 80s/90s Vacuum Cleaners
Can this part fit on Kirby G3 & G4? |
[Down to Last] |
Post# 398152   9/13/2018 at 06:51 (2,051 days old) by Gj3476 (Prosper,TX)   |   | |
Checkrate/Likes
 
     
This is a front gasket part that goes to Kirbys G5 to Avalir 2. I was wondering if this part can also fit to the G3 & G4? Just curious, thx.
|
Post# 398159 , Reply# 1   9/13/2018 at 14:48 (2,050 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 398160 , Reply# 2   9/13/2018 at 15:02 (2,050 days old) by Gj3476 (Prosper,TX)   |   | |
Checkrate/Likes
 
1    
|
Post# 398161 , Reply# 3   9/13/2018 at 15:04 (2,050 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 398405 , Reply# 4   9/18/2018 at 05:20 (2,046 days old) by Gj3476 (Prosper,TX)   |   | |
Checkrate/Likes
 
1    
KirbyClassicIII, I found a post about G series hoses and gaskets.
View Full Size
|
Post# 398430 , Reply# 5   9/18/2018 at 15:50 (2,045 days old) by Lesinutah (Utah)   |   | |
Checkrate/Likes
 
     
|
Post# 398433 , Reply# 6   9/18/2018 at 18:00 (2,045 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
Les,
Yes, it does. The G3/G4 hose can be used on the G5 and later machines, but the gasket on the hose connector has to be removed first. But, as the same article you mention says... to use the G5/Avalir II hose on the G3 and G4, let alone a G5/Avalir II nozzle (so the oblique brush roll can be used) or Carpet Shampoo System, the fan case will need to be changed to the type used on the G5/Avalir II. Personally, I would never do that for the sake of resale value. ~Ben |
Post# 398446 , Reply# 7   9/19/2018 at 00:09 (2,045 days old) by Lesinutah (Utah)   |   | |
Checkrate/Likes
 
1    
|