Thread Number: 36869  /  Tag: Conventions, Mini-Meets, Parties
Future VCCC convention locales
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 394295   7/3/2018 at 20:08 (2,121 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        

gottahaveahoove's profile picture
A few years ago, at the convention meeting, we had 3 years of destinations already on paper. This year, it has happened again. We're planned for 3 years. After discussing it with a few members/friends, the topic of Scranton, PA came up. I'm 6 miles from Scranton.
We've been able to see a lot of the country by having these in various places. This (Scranton idea) MIGHT be the farthest East we'd have.
To give some perspective, I'm 2.5 hours from New York City.... the backside of The Poconos.
Some positive points are: there are 2 gorgeous hotels, 2 blocks apart, which have shuttle service AND are ONLY 3 miles from the airport. There's a Houdini Museum, an art museum, Baseball club, a casino (just down the road), a "living museum... the Lackawanna Coal Mine tour (this is an actual coal mine, once used when Anthracite coal was King ).
I'm not sure how many would 'venture this far". I was told...several.
So, I'm toying with the idea. It would also mean hosting something here in my home. My very close friend, Tom A. promised he would be MY guest, and help me here in my home.
So, even though it's a few years out, I'm hoping folks will either talk me into it, Or OUT of it.


Post# 394297 , Reply# 1   7/3/2018 at 21:28 (2,120 days old) by kenkart ()        
I dont know about now

But years ago we had good turnouts in the east, Chicago,Milwaukee, etc were all good conventions Pennsylvania was our convention in 1995,Allentown, My first and it was just wonderful, I made friends then that I still am friends with today.

Post# 394298 , Reply# 2   7/3/2018 at 21:30 (2,120 days old) by kenkart ()        
Of course

Chicago and Milwaukee are considered Midwest,but they are to me more east than west.

Post# 394301 , Reply# 3   7/3/2018 at 21:36 (2,120 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
Right.

gottahaveahoove's profile picture
And, Allentown is just a little over an hour from me. It's very mountainous , scenic here. Mike Pletcher is still in A-Town.
There are some vac shops near me too. VAc Way, for example.
It would be wonderful to have Tom here. Well, one way or another, he'll be here. I've been toying around with some ideas of neat things to do here.
We'll see.


Post# 394302 , Reply# 4   7/3/2018 at 21:38 (2,120 days old) by kenkart ()        
Mike Pletcher is a great guy

And can really fix some good food!

Post# 394303 , Reply# 5   7/3/2018 at 21:42 (2,120 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
Yes, he can

gottahaveahoove's profile picture
I've been to dinner parties at his home.
The thoughhts of hosting are daunting AND exciting at the same time.


Post# 394314 , Reply# 6   7/3/2018 at 22:59 (2,120 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
IF this happens,

gottahaveahoove's profile picture
do you think, Hans, that you'd come? Fayetteville is about 8 hrs.

Post# 394320 , Reply# 7   7/4/2018 at 00:31 (2,120 days old) by compactc9guy (Bathurst NB)        

compactc9guy's profile picture
if i hada plane ticket i would go BUT im base in Canada New brunswick thats a tadd far for me

Post# 394335 , Reply# 8   7/4/2018 at 08:18 (2,120 days old) by S31463221 (Frenchburg, KY)        
John

s31463221's profile picture
I’ve never had an opportunity to attend any of the conventions (either the VCCC or the Tacony) mainly due to the distance from me and the lack of interest from my wife. If one was held here in the east, I would definitely be interested in trying to attend! I believe I’ve heard you’ve had them here in the past, but it was before I even knew you all existed! Please keep this thread updated, I’ll definitely be following it!

Steve


Post# 394339 , Reply# 9   7/4/2018 at 09:31 (2,120 days old) by kenkart ()        
I just might

Join back up and come, that's not a bad drive, We went to the national Christmas Museum last year in Lancaster, love the Amish food, and all the antique shops.

Post# 394347 , Reply# 10   7/4/2018 at 13:03 (2,120 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
Well, Hans,

gottahaveahoove's profile picture
that would be great.Know that you'd be most welcome back into The V.C.C. The PA convention was AGES ago. Im sure that nothing has been on "our side" of the country in a while. Hoover's 100th birthday was probably the closest, followed by Kirby in Cleveland.
Not trying to 'fill the conventions with too much stuff', BUT, we always try to include local attractions, in addition to vac shops, local sights, visits to homes, etc. It's ALWAYS a very nice time, as is evident in all of our posts.
My area is an old coal mining area, rich in history. We take all our area fro granted. Yes, it's not a huge metropolis like, say Chicago, but, it is very nice. It's VERY "hilly" around here. My home is just up the street from The Susquehanna River. Scranton, known as "The ELECTRIC CITY", is also a very nice, busy place. It's called The ELECTRIC CITY because it was the first city in the U.S. to use electric trolleys. thus, "electric". It's also home to Jesuit run "The University of Scranton", AND Marywood University, a 100 year old college run by The Sisters of The Immaculate Heart, commonly known as the "I.H.M s'. Montage ski resort is 4 miles from Scranton, and, there is a casino 9 miles away in addition to another one 50 minutes away.
I'll post more info.
Still not sure if it will be a "go", but.... I'm collecting data, etc. It would be great to meet you, Hans, in person.


Post# 394358 , Reply# 11   7/4/2018 at 21:28 (2,119 days old) by vacman1961 (North Babylon, New York)        

It would be great having a convention here on the East coast, that is one of the reasons that I rarely attend, they are too far away from me. I am not a fan of flying so most of my trips are made on the road. If we had one in Pennsylvania I am sure Chuck Chatham in Lewisburg, that's in central Pennsylvania, wouldn't mind us stopping by his vacuum store to see his beautiful collection and vacuum store.

Post# 394359 , Reply# 12   7/4/2018 at 23:07 (2,119 days old) by kenkart ()        
I WILL NOT FLY!

After 9=11, I have never flown again, never liked it before, but after, absolutely no way!

Post# 394360 , Reply# 13   7/4/2018 at 23:12 (2,119 days old) by compactc9guy (Bathurst NB)        
maybe one day if i save enough for it il drive there

compactc9guy's profile picture
if i lived in USA id love to go but im in Canada its a long ways away maybe one day well have meeting in Canada ?


Post# 394363 , Reply# 14   7/5/2018 at 00:36 (2,119 days old) by bagintheback (Flagstaff, Arizona)        
Out West?

bagintheback's profile picture
I've been wanting to go to a convention for years, but money is usually tight so I've been holding out for something closer to the west coast. Not much to see out here in Phoenix vacuum related, but maybe a convention in LA or Vegas where flights are cheaper? Or maybe Texas; that's closer to the center of the country.

I'll make it "back east" one day. Maybe in 4 years I can make it out to PA.


Post# 394374 , Reply# 15   7/5/2018 at 09:31 (2,119 days old) by kirbyvertibles (Independence, KS)        

kirbyvertibles's profile picture
John,
you have my vote!!!!


Post# 394426 , Reply# 16   7/5/2018 at 22:11 (2,118 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
We'd have to discuss it with the board AND

gottahaveahoove's profile picture
at the general meeting. After talking w/ several people, there's a possible FIFTY people interested. How did this happen?
It's looking more possible everyday.


Post# 394428 , Reply# 17   7/5/2018 at 22:33 (2,118 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
And, Hans!

gottahaveahoove's profile picture
A drive from NC to PA is do able! You'd like it here in the Pocono area, a lot!

Post# 394445 , Reply# 18   7/6/2018 at 13:53 (2,118 days old) by countryford (Phoenix, AZ)        

countryford's profile picture

bagintheback, it was talked about at this past convention (In Spokane), that the 2020 convention will be held in Phoenix.


Post# 394451 , Reply# 19   7/6/2018 at 17:42 (2,118 days old) by bagintheback (Flagstaff, Arizona)        
countryford

bagintheback's profile picture
Excellent! I hope that goes through. Two years won't be that long to wait :)

Post# 394624 , Reply# 20   7/10/2018 at 09:06 (2,114 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
And, Charlie...................

gottahaveahoove's profile picture
A drive from Manhattan is 2 and a half hours. We even have bus service, if your adverse to driving. Hans, my late father was from Roxboro. WE still have family in Charlotte and Fayetteville. I think THAT is an 8 hour drive. Consider that.
The more people are talking, it seems very likely to happen. (Yikes) Of course, a lot can happen between now and then. But, you'd all be very welcome here in the Wyoming Valley.
More details to come. Chad... let's talk about a lot of stuff , soon.


Post# 394690 , Reply# 21   7/11/2018 at 14:28 (2,113 days old) by Ultralux88 (Denver, Colorado)        

ultralux88's profile picture

Hans, I didn't get on a plane for the first time until after 9/11/01. I don't care to fly to the vacuum conventions because schlepping vacuums via shipping is costly and inconvenient. I also get anxiety in crowded airports, but despite being terrified of heights I do actually really love flying! Planes are FUN! 

 

But anyway, I've heard rumors of Denver in the past, and even tried a gathering here a few times, once rather seriously, but its never materialized. It would be fun though, and all of us out here would enjoy it...


Post# 394731 , Reply# 22   7/12/2018 at 00:05 (2,112 days old) by vacuumdevil (Vacuum Hell )        
Denver

vacuumdevil's profile picture
I definitely would recommend considering the Denver area. It's a cross point of major highway, flights are cheap and often if you want to fly. Also there's plenty of spaces for rent that are relatively inexpensive. Maybe that you even could be hosted at the right collectors residence.

Post# 394732 , Reply# 23   7/12/2018 at 00:10 (2,112 days old) by Royalfan (Chicago)        
free states

royalfan's profile picture
@bagintheback

definitely haven't more on the west coast would be a big plus someplace like Nevada,Arizona,Colorado or Texas.

It would be a big appeal to drive to a "free state" rather than having to surrender Safety and Security by going to New York.


My vote would be Colorado considering it's one of the freest states in the Union.


Post# 395022 , Reply# 24   7/15/2018 at 18:43 (2,109 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
wow! I'm already getting inquiries!

gottahaveahoove's profile picture
People offering to
'help
'.
just spoke w/ Joe Kassock too, today.
THis thing might actually happen in my "neck of the woods".


Post# 395023 , Reply# 25   7/15/2018 at 18:53 (2,109 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
It WOULD be great to see the "East Coasters"

gottahaveahoove's profile picture
more. Think I'd plan the visit to my home as a "garden party"

Post# 395094 , Reply# 26   7/16/2018 at 14:27 (2,108 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
It will give me the boost I need

gottahaveahoove's profile picture
to complete my renovation/restoration projects. I'm sure the 'bodies' will behave in the "lower level".

Post# 395095 , Reply# 27   7/16/2018 at 15:31 (2,108 days old) by Kirbyvertibles (Independence, KS)        

kirbyvertibles's profile picture
Reggie,
In one of our meeting I had suggested CO. as a possibility at some point. Who knows it may materialize


Post# 395404 , Reply# 28   7/21/2018 at 11:48 (2,103 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)        
I belienve (it's at least in PENCIL)

gottahaveahoove's profile picture
the plan is: Kansas City, Phoenix, Santa Fe....then... very possibly, Scranton.So, a few years are lined up. Subject to change, of course.

Post# 396567 , Reply# 29   8/10/2018 at 14:11 (2,083 days old) by lux14 (Leawood Kansas)        

Hi John,

Hope all is well. When is Kansas City on the list?

Appreciate, Richard.


Post# 396569 , Reply# 30   8/10/2018 at 16:09 (2,083 days old) by JustJunque (Western MA)        
May as well jump in here

justjunque's profile picture
Somewhere near Springfield MA?
Airport fairly close by.
Easy highway access.
Several hotels.
And a casino about to open, if that's your thing.

Barry



Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy